Foreword Thank you for choosing our digital video. Please read this manual carefully before using, and keep it in a safe place for future reference. The content involved in this manual is the latest information during compilation. The screen display and figures adopted by this manual are used to introduce the operation of the digital video in a more detailed and intuitive way, which may vary from the one in actual use due to the difference of technical development and production batches.
Operation Instructions There is write-protection switch on SD card. It can prevent deleting or formatting saved data. Metal Pin of Storage Card Write-Protect Switch Push write-protection switch to the bottom. Saved data in SD card will be protected. Push the switch to the top, the data will be unprotected.
Please do not bend the card, and prevent it from falling down or being pressed heavily. • Please do not expose the memory card in strong electronic/ magnetic fields, such as speakers or near TV receivers. • Please don’t use or keep the memory card in extra hot/cold circumstances. • Please keep the memory card clean and avoid touching it with any liquid. If so, dry it with soft cloth. • Keep the memory card in the card holder when not using.
- Turn the power off or remove the memory card while recording, deleting (formatting) or reading. • Recommend to backup important data in other media, such as soft disks, hard disks and optical disks. Maintenance for Digital Video Keep the digital video at dry place and remove its battery when not using. • Wear the wrist strap to avoid sliding it off while using. • Use proper protective film to avoid scratching the lens or display screen.
System Requirements When operating the digital video, please refer to the computer system with minimum requirements. We strongly recommend you to use better computer system for best performance of the digital video.
Mass Storage (Removable disk) PC Digital video (Camera) 4 times digital zoom Appearance Introduction Busy lamp Up MENU Playbac mode right OK Left down 6
Battery cover switch Shooting Battery 7
Tripod SD card slot Lens 8
Digital Video’s Key Functions and Indicators Press/ Indicator Functions Power key Shooting key Turn the digital video on/off 1.Shooting 2.Recording/Stop MENU key MODE key Playback key Up key Down key Left key Open/exit the menu. Stop playing (while playing video) Switch among picture, video and preview mode (press this key to switch to PCCAM after connecting to PC) Enter/exit playing mode. Select menu. Zoom in and move the picture (when the picture is zoomed in) Select menu.
Right key playing video, press and hold to reverse fast. In picture mode, adjust the shooting mode (self portrait \2S \10S \continuous). Move the picture (when the picture is zoomed in). While playing video, press and hold to forward fast. Press this button to enter menu and OK key start setting. Confirm and return to upper menu. Pause/play video. Busy lamp The indicator is constantly lit when the camera is turned on. Start Using Insert Battery This digital video uses 2 AA batteries.
Insert SD/MMC Memory Card Insert a SD/MMC memory card in the memory card slot with the metal pins towards inside in light of the prompts next to the card slot. To remove the memory card, press the SD/MMC memory card downwards, and then remove it. ─────────────────────────────────── Note: Turn the power off before replacing the memory card. Insert cards in correct direction. Do not insert cards with large force to avoid damaging cards or any part of the digital video.
Press Power key to turn the digital video on. Switch mode In picture/video mode, press the Play key to switch to playback mode; in playback mode, press the Play key to exit. Video recording In video recording mode, press the shutter key to start video recording, and press the shutter key again to stop recording. Taking picture In picture mode, press the shutter key to take a picture. Playback Press the Play key to enter the playback mode, browse the pictures and play the recorded video.
playing, press OK to pause, and press it again to resume playing. HDMI output To output video and sound from the video recorder to HDTV, insert the common terminal of the HDMI cable to the HDMI interface of the video recorder, and insert the input port of the HDMI cable into the HD input interface of the HDTV. Before inserting/pulling out the HDMI cable, stop the video recording/playing first.
minutes/5 minutes), it will turn off automatically for power saving. Menu settings In picture/video or playback mode, press the MENU key to open the menu, and then press the UP/DOWN key to select a menu, and press OK to enter the submenu. When selecting menu, the selected menu will be highlighted. ▲Video recording Menu ▲Shooting menu Date & Time Setting Press the MENU key to open the menu, and then press the LEFT/RIGHT key to enter the setting.
In setting window, press the LEFT/RIGHT key to select an item (date, time), and the selected item will be highlighted in Blue. Then, press the UP/DOWN key to adjust, then press OK to confirm, or press the MENU key to cancel and return. Finally, press the MENU key to exit the setting mode. Computer-connecting Before connecting to computer, please install driver for digital video with installation disk.
After turned on, the device enters picture/video mode automatically. Press the shutter key to take a picture directly. Press the shutter key to start video recording, and press it again to stop recording. Press the UP/DOWN key to zoom. Press the LEFT key to turn on/off the LED flash (flash isn’t used in playback mode). Press the RIGHT key to select self portrait 2S/10S or continuous mode.
▲Screen display message in video recording mode Icon Name Description NO . 1 Shooting mode 2 Self-shooting count down 3 White balance 4 Metering mode It indicates that it is able to take photos by pressing Shutter key in the shooting mode. It instructs the countdown for self-timer. It indicates the current settings for white balance. It indicates current metering mode.
5 6 7 Exposure Image size Image quality 8 Residual photos 9 SD Card It indicates current exposure value. It indicates current resolution of photos It indicates current selected picture quality. It indicates the remaining numbers of photos available to be taken. The icon indicates to insert the memory card, indicates that inserted SD is locked for write-protection. 10 Zoom indication 11 Battery level It indicates the current times for digital zoom. It indicates current power status.
15 ISO 100 16 Video recording mode 17 REC time 18 Video format Indicate that the value of ISO is 100. It indicates the digital video is in the video recording mode, in which press Video Recording key to record. The free time indicates the remaining available recording time; the recording time indicates the recorded time. It indicates resolution.
Video menu option: Main Menu Move size Sub Menu Description 1920x1080 Full HD 1280x720 High resolution scheme Medium resolution scheme It subjects to the central area when metering. It subjects to multi spots when metering It subjects to one spot when metering It is fit for many conditions. It is fit for day light circumstance.
Fluorescent Tungsten Effect Normal B&W Sepia Negative Red Green Blue Date stamp Off Date circumstance. It is fit for fluorescent lamp circumstance. It is fit for tungsten lamp circumstance. Normal effect Black & White effect Return to the ancients effect Negative film effect Partial red effect Partial green effect Partial blue effect Disable the function of printing date/time on files.
lower right corner of files. When shooting/video recording, the date and time will be print on the lower right corner of files Date & Time Picture menu option: Main Menu Sub Menu Description 2592 x 1944 5 million pixels resolution 3 million pixels resolution 1.
quality It subjects to the central area when metering It subjects to multi spots when metering It subjects to one spot when metering Enable the auto face metering, which optimizes faces automatically. Disable the auto face metering. It is fit for many conditions. It is fit for day light circumstance.
Tungsten Exposure / Off Self-timer 2s Driver mode Self-timer 10s Burst Effect Normal B& W Sepia fluorescent lamp circumstance It is fit for tungsten lamp circumstance. Use Left/Right key to adjust the compensation for exposure. Use the normal single photo shooting mode Use the 2s delayed self-timer mode. Use the 10s delayed self-timer mode.
Negative Red Green Blue Off Date Date stamp Date & Time Face detect On 25 ancients effect Negative film effect Partial red effect Partial green effect Partial blue effect Disable the function of printing date/time on files When shooting/video recording, the date will be print on the lower right corner of files. When shooting/video recording, the date and time will be print on the lower right corner of files. It will be shown on the screen.
Disable the function of face detection The digital video will shoot automatically if detecting smile of humans. Disable the function of smile capture. Off On Smile capture Off Anti-shake Activate anti-shake On during picture-shooting. Disable the function of anti hand shake.
In video, picture or playback mode, you can press the MENU key to open the menu, and press the LEFT/RIGHT key to enter the setting menu. Then, press the UP/DOWN key to select a menu, and press OK to enter the submenu. In the submenu, press MENU or OK to return to the main menu, press the UP/DOWN key to select and press OK to confirm. In the main menu, press the MENU key to exit. ▲ Setting menu When selecting menu, selected menu will be displayed in highlight.
Beep Volume Off Auto review 1sec. 3sec. Power frequency 50Hz 60Hz 1 min. Power save 3 min. 5 min. OFF On/off 0/1/2/3 No playback after shooting Playback 1s after shooting Playback 3s after shooting Set light source frequency as 50HZ Set light source frequency as 60HZ Auto power off after being in idle status for 1 min. Auto power off after being in idle status for 3 min. Auto power off after being in idle status for 5 min.
Date & Time Language / English French Spanish auto power off. Set date & time, together with the date format Set the menu language as English Set the menu language as French Set menu language as Spanish. NTSC TV out PAL Format Yes/No Reset Yes/No Set television system as NTSC Set television system as PAL Format the memory card. Restore settings the factory To set time and date, use Left button to switch item to be adjusted and press Up/Down button to change value.
button to cancel setting or return to main menu. Picture/Video Mode After power-on, digital video automatically enter video mode. Press shutter to start picture-shooting, video-recording, or stop video-recording. Press the UP/DOWN key to zoom. To delay self portrait, press the RIGHT key to switch to 2s/10s self portrait. Self portrait mode: press the shutter key to start counting down, and take a picture after 2sec or 10sec delay. Continuous Shooting Mode: Select continuous shooting mode.
◆ Menu setting Press the MENU key to open the picture/video menu, press the UP/DOWN key to select a menu, and press OK to enter the submenu. In the submenu, press OK to confirm and return to the main menu, press the UP/DOWN key to select and press OK to confirm. In the main menu, press the MENU key to exit. The selected menu will be highlighted in green.
to pause, press it again to resume playing, press and hold the LEFT/RIGHT key to reverse/forward fast, and release the key to play normally. Press the MENU key to stop playing. If a picture is selected, press the UP key to zoom in the picture, press the LEFT/RIGHT key to confirm and then press the direction keys to move the picture. ◆ Playback menu setting Press the MENU key to open the playback menu, press the UP/DOWN key to select a menu, and press OK to enter the submenu.
Main Menu Sub-menu Instructions Lock Lock/unloc Lock/unlock the present k one file Lock all Lock all files Unlock all Unlock all files One Delete the present file All Delete all files Start Start playing slide Interval 1 second-10 seconds Repeat Yes/No Voice Add Add sound label to picture memo Delete Delete sound label added Delete Slide show to picture Note: 1. The lantern slide playing and sound memo are only valid for pictures. 2.
key to play normally. Downloading Picture/Video via Connecting to Computer When digital video is connected to computer and enter removable disk mode, a new removable disk will be added to the window of “My Computer”. Recorded picture or video is stored in” DCIM\100MEDIA” of the removable disk. You can copy files in this path to your hard drive. ─────────────────────────────────── Note: 1. In the course of download, do not disconnect USB cord.
connected with computer and enters into camera mode, press the shortcut icon to open AMCAP window. In AMCAP window, captured image via camera will be displayed. If AMCAP is not run, the camera can transmit image through network. Install driver and software The provided CD contains video recorder driver and the software MAGIX Video easy SE / MAGIX Photo Manager 10 (used for picture and video processing).
(Depending on the PC configuration, it takes several seconds to run the installer automatically. If the installer window doesn’t appear, please open the “Windows Explorer”, and run the “SoftwareInstaller.exe”.) Install driver In the installation wizard window, click the “Install Driver” button, and follow the prompt to finish the installation step by step. Please restart the PC after installing the driver.
Resolution of 5M (2592 x 1944), 3M (2048 x 1536), 1.3M Picture (1280 x 1024) Storage External SD Card (128M to 32GB) File Format JPEG, AVI, WAV Video FHD 1920x1080,HD 1280X720,VGA 640×480 Resolution Self-shooting 640×480 2 seconds / 10 seconds Delay Digital Zoom 4 times White Auto/Daylight/Cloudy/Fluorescent /Tungsten Balance Exposure -2.0 ~ +2.0 Compensation USB Port USB2.0 TV Output NTSC / PAL Screen 2.
Size 114 mm × 52 mm ×60 mm Note: Specifications of product design are subject to the latest information written in this instruction manual. Any change of the product will not be noticed further. It is subject to real product. Common Problem-Shooting Failure in power-on 1. Battery is low, please replace with new batteries. after installing 2. Battery package is not removed. battery 3. Wrong installation, please make sure that battery installation is correct. Can’t picture take or 1.
The picture is 1. Hand shakes when taking picture. blurry Please hold the video recorder with both hands, or use a tripod to stabilize the device; do not make the device shake when taking picture. The picture or 1. The environment lighting is video is dark insufficient. Please take picture or record video at a place with sufficient lighting, or use flash light to increase the brightness. The video recorder turns 1. The battery voltage is too low; please replace the battery. off 2.
Please turn off this function in the menu. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Only the USB cable supplied (with molded ferrite core) must be used with this product 41