User's Manual



6
Removing SD Card
Close all programs or files on the card first. Click Settings → Storage → Remove SD
card → OK. Then press the card with your finger, and simply remove it when card is
ejected.
☆ Do not insert and remove the card repeatedly in a short time, this may cause damage
to the card.
☆ We suggest using a reputable storage card brand to ensure compatibility.

5. Getting Started
Charging the device
☆ It is not recommended to charge the device via USB cable.
☆ You may operate the device while charging it, but this may prolong the charging
time.
Connect one end of the AC adaptor to main supply and the other end to the power jack
on the device to charge it (it may take about 5 hours to fully charge the device).
The battery icon
will roll during charging, when battery is full (it will stop
rolling), please disconnect the AC adaptor.
Starting the device
Press and hold the power switch for 3 seconds and wait for system startup.
Wi-Fi setting
We suggest you configure your Wi-Fi network before using, as many functions require