User Manual

Shure Incorporated
10/19
•
•
⑥ Monitor Mix slider Move the slider to adjust the levels of mic and playback sound sources. See "Monitor Mix Blend" for
more information on monitoring.
⑦ EQ Use the equalizer to add a high-pass filter, presence or both. Tap Flat to return to an unchanged equalization state.
⑧ Limiter and Compressor settings Fine tune your audio with limiter and compressor controls. See "Advanced Mic Settings"
for more information.
Note: Be aware that manual settings will be reset if you switch to Auto Level mode and switch back to manual mode.
Monitor Mix Blend
Use the monitor mix slider to adjust how much of each source you can hear. For best results, start monitoring at the midpoint
and adjust.
Move the slider towards the microphone icon (Mic) to hear more of the audio going into the mic. Like when you're singing
over a recorded guitar track and want to clearly hear your voice.
Move the slider towards the device icon (Playback)tohearmoreofthetrackplayingback.Whenyou'rerecordingahar-
mony to your original vocal track and want to clearly hear the original performance.
EQ Modes
Use the equalizer to boost or cut bands of frequencies to improve sound clarity. Tap Flat to return to an unchanged equalisation
state.
Mode Characteristics
Flat
A completely unprocessed signal (no equalization settings used).
High-
pass
High-pass filter to reduce proximity effect.
Equalization that emphasizes clarity and fullness.