User's Manual
Table Of Contents
- Table of Contents
- AD3 Plug-On Transmitter
- WARNING
- AD3 Axient Digital Plug-On Transmitter
- Included Components
- Optional Accessories
- AD3 Transmitter Overview
- Setup
- Setting the AA Battery Type
- Transmitter Controls
- Menu Overview
- Home Screen Display
- Locking the Interface
- IR Sync
- Setting the Frequency Manually
- Updating Firmware
- RF Mute
- Safe Start
- Input Overload
- Input Overload
- Tone Generator
- Matching Audio Levels with Offset
- Menu Item Descriptions
- Specifications
- Mic Offset Range
- Battery Type
- Battery Runtime
- Dimensions
- Weight
- Housing
- Operating Temperature Range
- Storage Temperature Range
- Audio Input
- Connector
- Configuration
- Impedance
- Maximum Input Level
- Preamplifier Equivalent Input Noise (EIN)
- Phantom Power
- High Pass Filter
- RF Output
- Antenna Type
- Impedance
- Occupied Bandwidth
- Channel-to-Channel Spacing
- Modulation Type
- Power
- Specific Absorption Rate (SAR)
- Frequency Bands and Transmitter RF Power
- LICENSING INFORMATION
- Certifications
- Contact Customer Support
Shure Incorporated
13/23
1.
2.
◦
◦
3.
•
•
•
RF Mute
RF mute prevents transmission of the audio by suppressing the RF signal while the transmitter remains powered-on. The home
screen displays RF Muted in this mode.
From the Radio menu, navigate to Output.
Choose one of the following options:
On: RF signal is active
Mute: RF signal is disabled
Press O to save.
Note: Turning the transmitter off and on or replacing the battery will restore Output to On.
Safe Start
Power on in safe start mode to prevent interference with other devices. Hold the ^ button while powering on your device until
the Safe Start menu appears.
Safe Start menu options:
RF: Mute or On
Locks: None, Pwr, Menu, All
Phantom: Off, +12V, +48V
Use the navigation buttons to make changes.
Tip: To exit the Safe Start menu, push X.
Note: Previous settings for locks, RF, and phantom power will be retained when the transmitter is powered on in safe start mode.