User Manual

Shure Incorporated
21/40
2.
3.
◦
◦
4.
1.
2.
3.
4.
1.
2.
To begin, use the control wheel to choose the group you'd like to scan.
Choose one of the following options:
Find Next: Finds the next available frequency within the group
Find Best: Finds the best available frequency based on RSSI
Press ENTER to confirm your frequency selection.
Group Scan
Group scan automatically finds all available frequencies within a group. Available frequencies can be automatically deployed to
receiver channels and other networked components.
From a selected channel: Group Scan.
Press Start to scan the group.
When the scan is complete, the number of frequencies found are shown on the display.
Select Deploy to assign frequencies to components on the network.
Requesting a New Frequency from a Spectrum Manager
When you have assigned a Spectrum Manager as a frequency server for the receiver, you can use the New Frequency menu
option to quickly change to a clear frequency. The New Frequency option is only available when you have assigned a Spec
trum Manager as a frequency server for the receiver.
Caution: After a new frequency has been assigned, the frequency of any linked transmitters must be updated manually or by
using IR sync.
Navigate to a channel menu, and then select New Frequency.
Select ENTER to get a new frequency from the Spectrum Manager.
Transmission Modes
The receiver offers two transmission modes to efficiently manage the available spectrum used by the transmitters:
Standard Mode
Standard mode employs channel spacing that allows for the operation of transmitters at various power levels.
Standard mode is ideal for situations where spectrum is not limited or when you need to operate transmitters at higher
power levels to increase range.