User Manual

Shure Incorporated
32/40
1.
2.
3.
1.
2.
3.
4.
1.
2.
◦
◦
Individual parameters can be configured in the IR Presets menu. Each preset has the default value of No Change, which leave
that setting unchanged by an IR sync.
Select from the channel menu: IR Presets
Use the control wheel to select and edit parameters from the preset list. Select No Change to keep existing settings.
Press ENTER to save.
Encryption
The receiver features Advanced Encryption Standard (AES-256) to ensure that only the receiver that is keyed to the transmitter
can monitor the audio content.
Note: When enabled, encryption is applied to all receiver channels. Encryption does not affect Dante audio signals, audio quality, or channel spacing.
From the Device Configuration menu: Device RF > Encryption.
Use the control wheel to select On.
Press ENTER to save.
Perform an IR sync to complete the encryption between the transmitter and the receiver. The encryption key icon will
appear on the display of both the receiver and the transmitter.
Note:
Any change to the encryption status on the receiver such as enabling/ disabling encryption or requesting a new encryp
tion key, requires a sync to send the settings to the transmitter.
Tip: To remove encryption, use the control wheel to select Off and re-sync the transmitter to clear the encryption.
Cooling Fan
The receiver contains an internal cooling fan to protect against over-temperature conditions.
From the Device Configuration menu: Fan
Select from the following fan setting options:
Auto: The fan will automatically turn on if the receiver temperature rises
On: The fan will run continuously to offer maximum cooling in warm environments
Tip: The internal receiver temperature is shown on the Fan display screen.