User Manual
Table Of Contents
- Table of Contents
- ADX1MBodypack Transmitter
- WARNING
- ADX1M Axient Digital Micro Bodypack Transmitter
- Included Components
- Optional Accessories
- ADX1M Transmitter Overview
- Home Screen Display
- Transmitter Controls
- Locking the Interface
- Shure Rechargeable Batteries
- Menu Parameters
- Menu Parameter Descriptions
- IR Sync
- Setting the Frequency Manually
- RF Mute
- Safe Start
- Wearing the Bodypack Transmitter
- Input Overload
- Matching Audio Levels with Mic Offset
- Tone Generator
- Tone Generator
- ShowLink Test
- Updating Firmware
- Specifications
- Mic Offset Range
- Battery Type
- Battery Runtime
- Dimensions
- Weight
- Housing
- Operating Temperature Range
- Storage Temperature Range
- Audio Input
- Connector
- Configuration
- Impedance
- Maximum Input Level
- Preamplifier Equivalent Input Noise (EIN)
- RF Output
- Antenna Type
- Impedance
- Occupied Bandwidth
- Channel-to-Channel Spacing
- Modulation Type
- Power
- ShowLink
- Network Type
- Antenna Type
- Frequency Range
- RF Output Power
- Input Connector Diagram
- Frequency Bands and Transmitter RF Power
- Australia Warning for Wireless
- Certifications
Shure Incorporated
8/22
•
•
•
Battery Installation
Removing the Battery
① Pull back to disengage the battery latch.
② Slide the battery out of the transmitter.
Installing the Battery
① Slide the battery into the transmitter.
② Fully engage the latch to secure the battery
ADX1M SB910M Battery Runtime
Note: Higher RF power levels decrease battery runtime. Battery runtime varies with battery age and environmental conditions.
2 mW 10 mW 20 mW
6.5 to 8.5 hours 6.0 to 8.0 hours 5.0 to 6.0 hours
Menu Parameters
The Main menu organizes the available transmitter parameters into three sub-menus:
Radio
Audio
Utilities
Tip: Use the arrow buttons to scroll between the sub-menus.