User's Manual
Table Of Contents
- Table of Contents
- AD2Handheld Transmitter
- WARNING
- AD2 Handheld Transmitter
- Features
- Included Components
- Optional Accessories
- AD2 Transmitter Overview
- Transmitter Controls
- Home Screen Display
- Locking the Interface
- Battery Installation
- Installing the Battery Contact Cover
- Installing the Battery Contact Cover
- Shure SB900A Rechargeable Battery
- Menu Parameters
- Menu Parameter Descriptions
- IR Sync
- Setting the Frequency Manually
- Updating Firmware
- RF Mute
- Safe Start
- Input Overload
- Tone Generator
- Matching Audio Levels with Offset
- Specifications
- Frequency Bands and Transmitter RF Power
- LICENSING INFORMATION
- Australia Warning for Wireless
- Certifications
- Contact Customer Support
Shure Incorporated
10/25
1.
2.
3.
Installing the Battery Contact Cover
Use battery contact covers to prevent reflections from the battery contacts during broadcasts or live performances.
Remove the transmitter handle.
Pull gently on the antenna cover to remove. Install a battery contact cover in its place.
Reinstall the transmitter handle.
Shure SB900A Rechargeable Battery
Shure SB900A lithium-ion batteries offer a rechargeable option for powering the transmitters. Batteries quickly charge to 50%
capacity in one hour and reach full charge within three hours.
Single chargers and multiple bay chargers are available to recharge the Shure batteries.
Caution: Only charge Shure rechargeable batteries with a Shure battery charger.
Battery Life
UHF 1.x
2mW/10mW 35 mW 2 mW/10mW 30mW
SB900A 9 hours 4:30 hours 6 hours 5 hours
alkaline 8 hours 3:30 hours 5:30 hours 3:45 hours
The values in this table are typical of fresh, high quality batteries. Battery runtime varies depending on the manufacturer and
age of the battery.