RMCE-TW2 Shure True Wireless Secure Fit Adapters The Shure True Wireless Secure Fit Adapters and earphone user guide for RMCE-TW2. Version: 1.
Shure Incorporated Table of Contents RMCE-TW2 Shure True Wireless Secure Fit Adapters 3 Important Safety Information 3 ShurePlus™ PLAY Mobile Listening App 3 Fit 3 Auto Power and Pair 4 Earphone Charging 5 Case Charging 6 LED indicators 7 Button Functions Auto Power Off 15 Preset Modes 15 Create Custom Presets 16 Use Screen Orientation to Adjust EQ 16 Updating the Firmware for Shure AONIC products 17 Accessories 19 Furnished Accessories 19 Replacement Parts 19 Specifications
Shure Incorporated RMCE-TW2 Shure True Wireless Secure Fit Adapters Important Safety Information Before using this product, please read the warnings and safety instructions: SAFETY PRECAUTIONS ShurePlus™ PLAY Mobile Listening App Unlock the full potential of your listening experience: more info here Fit Select your sleeve Install 3/28
Shure Incorporated Press firmly into ear They should fit like earplugs Button Auto Power and Pair 1. Remove from case. The adapters automatically enter pairing mode.
Shure Incorporated 2.
Shure Incorporated Earphone Charging Earphone Charging RED when charging, GREEN when fully charged.
Shure Incorporated Charging Case Battery Life Press to display the number of times the case can charge the earphones LED indicators Adapter LEDs Bluetooth pairing Alternating red and blue Bluetooth connected Blue for 2 seconds, then off Bluetooth connection lost Slow blinking blue Low battery Slow blinking red Button Functions Power on Press and hold until you hear "Power on". You must power on both earphones.
Shure Incorporated Press and hold the button on either adapter until you hear “Pow er off”. The other adapter automatically turns off. Power off Tip: Placing the earphones back in the case automatically pow ers them off. Pair Bluetooth From a powered off state: Press and hold the button on either adapter for about 5 seconds until you hear "Bluetooth pairing mode".
Shure Incorporated Environment Mode Press two times quickly Mute/Unmute Mic Press three times quickly Important: Use the ShurePlus™ PLAY app to identify the active phone call mic. Volume controls You can use the buttons to control the volume: Volume up Press once, then press and hold Volume down Press once, then press and hold Troubleshooting If you only hear sound from one side, when listening to audio: 1.
Shure Incorporated 3. Power on the other adapter. • Already paired: power them both on at the same time Reset paired devices list You may find it necessary to reset the True Wireless adapters. 1. Place adapters in charging case. 2. Ensure that the charging case LED is red. If not, remove the adapters from the case and power them on for several minutes before starting the process again. 3. Press and hold both buttons, 7 seconds. The adapters reset. To keep them sounding their best...
Shure Incorporated Do not use pliers or other tools. Do not pull on the adapter or put any pressure on the ear phone nozzle. Grasp the connector and earphone as close as possible to where they join. Pull straight apart. If you pull at an angle, the connector will not detach.
Shure Incorporated ShurePlus™ PLAY Mobile Listening App General Description The ShurePlus PLAY Mobile Listening App is a high-resolution music player with advanced EQ controls. Play uncompressed audio files with your iOS or Android mobile device using the music tab. Use built-in Shure EQ presets to customize the sound, or create your own EQ presets in the settings tab. Unlock environment mode and ANC features by connecting to Shure wire less and True Wireless products in the device tab.
Shure Incorporated Button Controls You can customize the buttons for your earphones to control the features in the way that you want. You can control the button responses for: • Music and Audio • Phone calls • Volume Use Button Controls from the device home screen to access the Button Controls screen where you can customize the buttons for your earphones.
Shure Incorporated Prompts & Tones You can select between voices, tones, and mute for the audio feedback that plays when events like power on/off, Bluetooth connection, etc. occur. After you have selected what type of prompt you want and the volume, you can further specify individual prompts for muting.
Shure Incorporated Auto Power Off You can configure the Auto Power Off feature in the PLAY app to turn off your headphones when not in use: 1. Select Device 2. Select Battery & Power 3. Specify the auto power off time in Power Off When Disconnected ◦ After 10 Minutes ◦ After 1 Hour ◦ After 4 Hours ◦ Never Preset Modes Use presets to quickly access commonly used listening scenarios. Seven selectable 4-band presets optimize settings for gain, equalization, and compression.
Shure Incorporated Create Custom Presets Add new preset 1. Scroll down to tap Add New Preset or tap Manual. New presets start out flat. 2. Adjust your frequency, gain, and bandwidth parameters. There are three ways to adjust your equalizer. ◦ Tap the values to type in a specific number. ◦ Tap the - or + to adjust in larger increments. ◦ Tap and drag the numbered circles for bigger changes. 3. Tap Save to name and save your new custom preset. Custom presets will show up after the list of Shure presets.
Shure Incorporated Use landscape for a close-up view of your EQ curves. Updating the Firmware for Shure AONIC products Take advantage of additional features and design enhancements by updating the firmware on your AONIC product. To check for firmware updates, connect the AONIC product to a device running the ShurePlus PLAY app, available for Android and iOS. Follow these steps for a successful firmware update 1. Enable Airplane mode on your mobile device. 2.
Shure Incorporated 6. After a successful update, the “Update Completed” confirmation screen appears. ◦ Do not power off the AONIC product until the update completes. ◦ Do not put the adapters back into the case during firmware update. It will cancel the update. ◦ Note: If the update fails on the first attempt, be sure to quit the app completely before attempting again. You may need to force quit the app to confirm that it isn’t running in the background.
Shure Incorporated Tips to ensure a reliable update • • • • • • Ensure that the mobile device and your AONIC product are powered on and near to one another. Using the product or mobile device while downloading may slow or cancel the update process. Update requires a minimum battery charge of 50% on your mobile device and on the AONIC product. Approximate download time for headphones and earphones is up to 30 minutes. Do not exit the PLAY app and ensure that your screen is on.
Shure Incorporated Specifications Secure Fit Adapters Frequency 2402 to 2480 MHz Modulation Type GFSK, π/4DQPSK, 8DPSK RF Output Power 1.18 dBm EIRP (Left), 1.99 dBm EIRP (Right ) Antenna Type Integral antenna Antenna Gain -4.32 dBi (Left), -2.
Shure Incorporated Noise Attenuation up to 37 dB Frequency Range 21 Hz–17.5 kHz Input Connector MMCX connectors Net Weight 20.8 g (.7 oz.) SAFETY PRECAUTIONS Before using this product, please read and save the enclosed warnings and safety instructions. WARNING FOR ALL EARPHONES! Use, clean, and maintain earphones according to manufacturer’s instructions.
Shure Incorporated CAUTION • • • • Never disassemble or modify the device, as failures may result. Do not subject to extreme force and do not pull on the cable or failures may result. Keep the earphone dry and avoid exposure to extreme temperatures and humidity. If you are currently receiving ear treatment, consult your physician before using this device. High sound pressure Hearing damage risk To prevent possible hearing damage, do not listen at high volume levels for long periods.
Shure Incorporated CAUTION • Follow applicable laws regarding mobile phone and headphone use while driving. • This product contains magnetic material. Consult your physician on whether this might affect your implantable medical de vice.
Shure Incorporated This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment could be installed and operated with minimum distance 0 cm between the radiator and your body. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be colocated or operating in conjunc tion with any other antenna or transmitter.
Shure Incorporated Phone: +49-7262-92 49 0 Email: info@shure.de www.shure.com ® The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Shure Incorporated is under license. Other trademarks and trade names are those of their respective owners. ® Qualcomm aptX™ is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
Shure Incorporated THIS WARRANTY SUPERSEDES ALL OTHER WARRANTIES THAT ARE ASSOCIATED OR INCLUDED WITH THIS PROD UCT, EXCEPT THAT ANY SOFTWARE CONTAINED IN OR PACKAGED WITH THIS PRODUCT IS EXCLUDED FROM THIS WARRANTY AND INSTEAD SHALL BE COVERED BY THE WARRANTY, IF ANY, PROVIDED IN SHURE’S END USER LI CENSE AGREEMENT ACCOMPANYING SUCH SOFTWARE.
Shure Incorporated Wheeling, IL 60090-6449 U.S.A. Europe, Middle East, and Africa Shure Europe GmbH Attn: Service Jakob-Dieffenbacher-Str.
Shure Incorporated E-mail: saveyourears@sensaphonics.com http://www.sensaphonics.
