System information

Use the following guidelines to ensure accurate RF coordination and maximize the number of frequencies available.
• Place the antennas in the position where they will be used for the event
• Configure RF connections for all equipment
• Set up the Ethernet network for all components
• Set up and configure the ShowLink™ Network
• Set frequency bands for receivers
• Set Device IDs for networked components
• Turn off or RF mute all transmitters linked to receivers
The following abbreviations identify channel types and transmitter profiles in the Spectrum Manager menu:
AXT: Axient transmitters
AXT/URT: UHF-R transmitters used with an Axient receiver
AXT/MWTx: MW transmitters (Japan and Korea) used with Axient receivers
MW: MW channels (Japan and Korea)
UHF-R: UHF-R channels
PSM: PSM 1000 channels
User groups are country-specific frequencies designated by regulators for licensed users. Selecting a country and user
group ensures that the Spectrum Manager only uses frequencies from this group. The default setting is no user group.
From the Spectrum Manager menu: Util > More > Country
1. Select a country, and then choose a user group.
2. Press Enter to save changes.
Before Starting an RF Coordination
Channel Types and Transmitter Profiles
Selecting Country and User Group for the AXT600 Spectrum Manager
100
Part 3: System Operation