System information

Step 3. (DHCP server)
If the computer is configured to automatically get an IP address from the DHCP server, you can verify this by checking the
DHCP client table on the AXT620 Ethernet switch.
Check the DHCP server configuration.
Log into the AXT620 Ethernet switch by opening a web browser and navigating to the DHCP server address by typing
its IP address (default = 192.168.1.1) into the URL window. Select the ‘System’ from the main menu, then ‘DHCP server’
option, and finally the ‘System Configuration’ from the middle menu.
The DHCP server switch should be ON and the IP address fields should be set to the above values (as default). If you do
not see this configuration and want to restore the factory default, you can select the ‘Factory Default’ option from the main
menu.
Note: If you factory reset the DHCP server, you should also power cycle the all other devices on the network after the DHCP server reboots.
129
Chapter 20 ‒ Wireless Workbench 6 Connectivity Troubleshooting