System information

AXT610 ShowLink™ Access Point
AXT620 Ethernet Switch
Front and Rear Panel
① ShowLink 2.4 GHz detachable antenna
For 2.4 GHz signals
② ShowLink Data Status LED (blue)
• ON Steady: Linked, no data transmission
• Flashing: Transmitting data - rate of flashing indicates level of activity
③ Power Status LED (green/amber/red)
• Steady Green: Power ON, power source = PoE
• Steady Amber: Power ON, power source = external power supply
• Red Flashing: Response to remote ID flash command
④ Ethernet Status LED (green)
• ON Steady: Ethernet connected, no traffic
• ON Flashing: Ethernet connected, flashing corresponds to volume of data traffic
⑤ Threaded mounting point
Use to wall mount the access point
⑥ External power supply connector
Connection point for external power supply
⑦ Reset button
Press to restore factory settings
⑧ Ethernet port
For network connection and Class 1 PoE
⑨ Scanning antenna for channel agility
Scans the 2.4 GHz spectrum for the best frequency
① RJ-45 Ports
One 10/100 N-way auto-sensing for 10Base-T or
100Base-TX connections.
② Front Panel LED Indicators
LINK
• Green: Connected to network
• Blinking: Networking is active
• Off: Not connected to network
100Mb
• Amber: The port is operating at speed of 100
Mb
• Off: The port is disconnected or not operating
at speed of 100 Mb
PoE
• Amber: The port is supplying power to the
connected PoE device
• Off: No powered device attached
③ DHCP Switch
Turns the DHCP server ON or OFF. (Left side =
On, Right side = Off)
④ Power
• Green: Power on
• Off: No AC power applied
⑤ Power cord socket
The switch will work with AC in the voltage range
of AC 100-240V with frequency of 50-60Hz.
⑥ RJ-45 Ports
Eight 10/100 N-way auto-sensing for 10Base-T
or 100Base-TX connections. Ports 5-8 also can
supply power over Ethernet to enabled-devices.
⑦ Reset button
Reboots the system. If you press the Reset button
for over five seconds, the system will reset to
factory defaults.
⑧ System information sticker
Displays the MAC address.
⑨ Rear Panel LED Indicators
LINK (port 1 ~ 8)
• Green: Connected to network
• Blinking: Networking is active
• Off: Not connected to network
100Mb (port 1 ~ 4)
• Amber: The port is operating at speed of 100
Mb
• Off: The port is disconnected or not operating at
speed of 100 Mb
PoE (port 5 ~ 8)
• Amber: The port is supplying power to the
connected PoE device
• Off: No powered device attached
151
Chapter 25 ‒ User Interfaces
⑤
AXT610
Axient Wireless
Showlink Acces Point
PUSH
①
②
③
④
⑥⑦ ⑧
⑨
POWER
AXT620
Ethernet
Switch
LINK
LINK
LINK
10/100Mb
10/100 10/100 & PoE
100Mb
100Mb
PoE
1234 5678
ON
OFF
DHCP
1
2 4
3
Model Name: SHURE AXT620
MAC: 0011FC059C60
S/N: 65770110100015
LINK
10/100 Ethernet
100Mb
1234
5678
LINK
PoE
10/100 Ethernet W/PoE
RESET
Input: 100-240 V~ 50/60Hz 2A max.
5
6
9
7
8
AXT620 Ethernet Switch
Made in Taiwan