System information

Adjust
Use the control wheel for real-time editing of transmitter parameters:
Gain, Power, RF Output, Lock.
Edit ID
Use the control wheel to edit the Device ID.
Flash
Flashes the display of the selected transmitter.
Mute (Unmute)
Disables the RF carrier to mute the audio. Select Unmute to enable
the RF carrier.
IR Presets
Program initial transmitter settings from the receiver. IR presets auto-
matically configure the transmitter when an IR sync is performed.
Use the control wheel to edit a parameter, select No Change to pre-
serve current setting.
Battery
Set battery type (Alkaline, Lithium, NiMH) when using the AXT913
battery sled or AXT921 battery carrier to power the transmitter.
Setting the battery type ensures accurate metering of battery runtime
FW Update
Downloads a transmitter firmware update stored in the receiver. Align
the transmitter with the IR Sync port and press Download. Maintain
transmitter alignment until download is complete. Use the Firmware
Update Manager tool in WWB6 to download updates.
Unlink
Ends linking relationship to release transmitter from ShowLink control.
Sync
Activates the IR sync function to link a transmitter and receiver. Align
the IR ports of transmitter and receiver before selecting the Sync op-
tion. Correct alignment is indicated by the illumination of the red LED
in the receiver IR port.
Tx Menu (AXT400 Receiver)
Displays IDs transmitters linked to the receiver. Up to 2
Axient transmitters may be linked.
A ShowLink icon and current battery life are displayed
next to each transmitter.
Use the control wheel to select a transmitter for editing.
Retry
Battery
FW Update
Edit ID
Flash
Mute (Unmute)
IR Presets
Adjust
Unlink
Download
Tx Menu
Sync
Adjust
IR Presets
Unlink
Sync
Linked Devices:
1: [AXT200] 3:15
2:
Menu acts on highlighted device
158
Part 7: Reference Chapters