System information

Devices
Displays list of networked devices. A checkmark in the box next to a
device indicates that it is controlled by the Spectrum Manager.
Press the control wheel to add or remove a checkmark from a se-
lected device. “Offline” indicates offline devices.
Ch Info
Displays information for a selected receiver (Device ID,
Channel Name, Band, Tx Profile, ShowLink status).
Back
Returns to previous menu screen.
Flash
Flashes interface LEDs for selected device. Only available for
online devices.
Edit
Allows editing of transmitter profile (AXT, UHF-R), when receiver is
online.
Clear
Clears all devices (including offline devices) controlled by the
Spectrum Manager. All boxes appear unchecked.
Add All
Adds all devices on the network to Spectrum Manager control.
Scan
Access the scan function. Use the control wheel to set Sweep
(Single/Continuous), Peak Hold (Off/On), and Exclusion
Threshold (-70 to -110 dB).
Start/Stop
Start activates the scan function. Stop ends the scan function.
Recall
Recalls a stored scan from Spectrum Manager memory. Recalling a
scan will overwrite current scan data
Store
Stores current scan data in Spectrum Manager memory. Previously
stored scan data will be overwritten.
Listen
Activates the Listen function for audio monitoring of a selected
frequency. Use the control wheel to select frequency, band, and
antenna.
Signal strength for the selected frequency is shown on the data dis-
play window.
Manual Menu (AXT600 Spectrum Manager)
Displays the number of devices controlled by the
Spectrum Manager.
Ch. Info
Clear
Add All
Flash
Devices
Listen
Back
Flash
Edit
Manual Menu
Scan
Store
Start/Stop
Recall
Devices
Controlled: 12
Devices
Scan
Listen
160
Part 7: Reference Chapters