System information

AXT630 Antenna Distribution System Menus and Navigation
IP Mode
Band
Network Status
IP Address
RF Gain
Subnet
Antenna Cascade
MAC
Antenna Power
Brightness
Display Invert
Front Panel Lock
Power Switch Lock
Fan
Firmware
Serial Number
Device ID
Main Menu Description
Use the Main menu to select the band filter, adjust the RF gain, and configure the an-
tenna ports.
Utility Menu Description
Use the Utility menu to configure network settings and adjust device settings.
Band
Selecting an input Band filtering.
• Band: Four selectable input filters are
available to match the frequency bands
transmitters and receivers.
• Wideband: Extends frequency support
across all 4 bands allowing receivers in
different bands to use the RF outputs.
Antenna Cascade
• Auto: The ports will activate when a
connected device supplies 12-15 V DC to
the port.
• On: The ports are continuously active,
independent of voltage applied by a
connected device.
RF Gain
Gain adjustments are made in 1 dB
increments to boost or attenuate the
antenna signal .
Antenna Power
• On: The antenna ports supply 12-15 V DC to
power active antennas.
• Off: Turns off DC voltage at the antenna
ports.
Network Status
• Active: Indicates connectivity with other
devices on the network.
• Inactive: No connectivity with other devices
on the network.
Press and hold both
arrow keys to navi-
gate between the
Main menu and the
Utility menu.
IP Mode
• Automatic: Use with a DHCP server which
automatically assigns an IP address.
• Manual: Use to set a valid IP address and
subnet when a DHCP server is not available.
IP Address
Displays IP address.
Subnet
Displays subnet setting.
MAC (MAC Address)
Displays the MAC address, which is
an embedded, uneditable identification
number used by the network and WWB
to identify components.
Brightness
Sets the brightness of the LCD to low,
medium, or high.
Display Invert
Changes the LCD menu from white text
on dark background to dark text on a light
background.
Front Panel Lock
Locks or unlocks the navigation buttons
to prevent accidental or unauthorized
changes to settings.
• On: Locks the navigation buttons.
• Off: Unlocks the navigation buttons.
Power Switch Lock
Lock the power switch to ensure that
power is not accidentally turned off.
• On: Locks the power switch.
• Off: Unlocks the power switch.
Fan (Cooling Fan Mode)
• Automatic: The fan is enabled and adjusts
speed based on the internal temperature of
the unit.
• Always On: The fan runs continuously
at maximum speed to provide maximum
cooling in warm environments.
Firmware
Displays the version of firmware installed
on this device.
Serial Number
Displays the serial number.
Device ID
Identifies the device on the network. Use
the SET and arrow keys to edit.
The AXT630 has two separate menus: Main and Utility. Press and hold both arrow keys to navigate between the two menus.
SET
163
AXT630 Menu