System information

AXT900 Rackmount Charging Station Menus and Navigation
IP Mode
Monitoring
Charge Status
Network Status
IP Address
Time to Full
Subnet
Battery Health
MAC
Cycle Count
Batt. Temp.
Brightness
Display Invert
Storage Mode
Fan
Firmware
Serial Number
Device ID
Monitoring Menu Description
Use the Monitoring menu to check battery status.
Utility Menu Description
Use the Utility menu to configure network settings and adjust device settings.
Time to Full
Displays the time remaining until the
battery is fully charged.
Charge Status
Displays charge as a percentage of the
total battery capacity. Also displays charge
in milliampere-hours (mAh).
Battery Health
This displays the health of a selected
battery as a percentage of the charge
capacity of a new battery.
Cycle Count
Displays the total number of times that the
battery has undergone one full count of
discharge and charge.
Batt. Temp. (Battery Temperature)
Displays both the battery temperature (in
Celsius and Fahrenheit) and the status
(Cold, Warm, Hot).
Network Status
• Active: Indicates connectivity with other
devices on the network.
• Inactive: No connectivity with other devices
on the network.
Press and hold
both arrow keys to
navigate between
the Monitoring menu
and the Utility menu.
IP Mode
• Automatic: Use with a DHCP server which
automatically assigns an IP address.
• Manual: Use to set a valid IP address and
subnet when a DHCP server is not available.
IP Address
Displays IP address.
Subnet
Displays subnet setting.
MAC (MAC Address)
Displays the MAC address, which is
an embedded, uneditable identification
number used by the network and WWB
to identify components.
Brightness
Sets the brightness of the LCD to low,
medium, or high.
Display Invert
Changes the LCD menu from white text
on dark background to dark text on a light
background.
Fan (Cooling Fan Mode)
• Automatic: The fan is enabled and adjusts
speed based on the internal temperature of
the unit.
• Always On: The fan runs continuously
at maximum speed to provide maximum
cooling in warm environments.
Storage Mode
Charges or discharges all batteries to
bring them to a 3.8 volts, ideal for long
term storage.
• Off: Normal charge.
• Store at 3.8 V: Charges or discharges all
batteries to 3.8 volts.
Firmware
Displays the version of firmware installed
on this device.
Serial Number
Displays the serial number.
Device ID
Identifies the device on the network. Use
the SET and arrow keys to edit.
SET
The AXT900 has two separate menus: Monitoring and Utility. Press and hold both arrow keys to navigate between the two menus.
164
Part 7: Reference Chapters