System information

Network Topologies
Multiple Ethernet Switch Setup #1
• Any AXT620 switch (but only one) can be set as the DHCP server
• Each networked device needs an individual connection to the switch
• Connect them via any port
AXT620 with front panel
DHCP switch set to ON
Server
Client
Client
AXT620 with front panel
DHCP switch set to OFF
AXT620 with front panel
DHCP switch set to OFF
There are several ways to configure a network of devices. In general, you should always use a "star" network topology
where each device uses one connection to an Ethernet switch port. If multiple switches are used, each switch is
individually connected to one connection to the next level of Ethernet switch.
Below are three example configurations of large networks of devices.
AXT610
ShowLink
Access Point
56
Part 2: System Setup and Configuration
ON
OFF
DHCP
ON
OFF
DHCP
ON
OFF
DHCP
AXT610
Axient Wireless
Showlink Acces Point