System information

70
Part 2: System Setup and Configuration
AXT610
Axient Wireless
Showlink Acces Point
AXT610
Axient Wireless
Showlink Acces Point
AXT610
Axient Wireless
Showlink Acces Point
AXT610
Axient Wireless
Showlink Acces Point
AXT610
AXT610
Use the following guidelines when positioning the access point:
• Provide a clear line of site between the access point and transmitters
• Mount the access point on a microphone stand or wall to elevate above crowd level
• Position the antenna vertically for optimal performance. The swivel joint on the antenna allows a wide range of
positioning to maintain a vertical alignment
• When installing multiple access points in the same location, maintain a minimum of six feet of separation between the
access point antennas
Microphone Stand Mount Horizontal Mount
Wall Mount
Recommended Installation Methods
Avoid These Installation Methods
Do not orient the antenna as shown.
Do not orient the antenna horizontally.
Positioning the Access Point
Do not locate the access point and antenna
behind glass.Glass walls may be laminated
together for structural purposes and can also
be coated with reflective materials for energy
efficiency which can significantly attenuate the
ShowLink signal.