System information

When the using the receiver with other digital components, a word clock synchronizes the digital signals. The receiver's
internal word clock syncs to other digital components at the Thru port on the rear panel. External word clock sources can
be connected to the In port. The digital sample rate can be set to 48 kHz or 96 kHz. If the receiver is connected to an
external clock, the sample rate will automatically match the source clock rate.
To manually set the sample rate: Audio > Output > Digital
1. Use the control wheel to set the sample rate to 48 kHz or
96 kHz.
2. Press Enter to save.
Connecting an External Word Clock
Use the In port and Thru port to share the word clock signal with multiple components. Set the port switches as shown.
Example of multiple receivers sharing an external word clock signal:
To external word clock
Set Term switch to Thru
Word Clock
Set Term switch to Thru
Set Term switch to 75Ω
85
Chapter 13 ‒ Audio Channels
Digital Sample Rate
Internal Set: 48 kHz
Rate Status: 48 kHz (int)
BNC Status: Thru
analog outputs receiver 2
line
mic
lift
GND
AES3 output
in
word
clock
thru
Term 75Ω
analog outputs receiver 1
line
mic
lift
GND
analog outputs receiver 2
line
mic
lift
GND
AES3 output
in
word
clock
thru
Term 75Ω
analog outputs receiver 1
line
mic
lift
GND
analog outputs receiver 2
line
mic
lift
GND
AES3 output
in
word
clock
thru
Term 75Ω
analog outputs receiver 1
line
mic
lift
GND