D r 6/ aft 7/ 11 AXT210 Handheld Single Channel Transmitter ©2011 Shure Incorporated 27A15019 (Rev.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Batteries Axient transmitters are powered by a Shure lithium-ion rechargeable battery. Battery Runtime Chart Battery runtime varies according to the transmitter’s operating mode. Higher power settings will reduce battery runtime. Remaining battery runtime is shown on the display in the form of a bat- Caution: Turn off the transmitter before changing batteries. tery indicator icon and approximate time in hours and minutes.
AXT210 Axient Handheld Transmitter The AXT210 delivers ultra-linear RF performance for more channels on air and superb audio quality. Its advanced rechargeable power management supports extended battery life and highly accurate status metering. ShowLink™ Remote Control enables comprehensive real-time remote control of all transmitter parameters, including real-time frequency adjustments.
Parameter Menus To adjust transmitter settings, use the arrow buttons to access and edit the parameter menus. Device ID RF PWR PCB Serial Number • ID length can be up to 8 characters Use lower power settings to conserve battery life and to prevent RF overload at the receiver. 1. From the main menu screen, press and hold the ▼ and “set” buttons to enter the RF Power screen. The device ID identifies the transmitter on a network in WWB software or when linked to a receiver.
Specifications- AXT210 Handheld Transmitter Axient System RF Carrier Frequency Range Working Range Audio Input 470–952 MHz Configuration Unbalanced Note: varies by region Impedance >30 kΩ Under typical conditions: Line of Sight, outdoors for a single system: 150 m (500 ft) 6 Sensitivity Setting: 0 dB: +12 dB: 5.5 dBu −6.5 dBu 500 m (1600 ft) Note: Actual range depends on RF signal absorption, reflection and interference.
Certifications Meets essential requirements of European R&TTE Directive 99/5/EC, eligible to bear the CE mark: WEEE Directive 2002/95/EC as amended by 2008/34/EC. RoHS Directive 2002/95/EC as amended by 2008/35/EC. Meets requirements of EMC standards EN 300 328, EN 300 422 Parts 1 and 2, and EN 301 489 Parts 1 and 9. Certified under FCC Part 15 and FCC Part 74. Certified in Canada by IC to RSS-123 and RSS-210. This Class B digital apparatus complies with Canadian ICES-003.
D r 6/ aft 7/ 11 United States, Canada, Latin America, Caribbean: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: 847-600-2000 Fax: 847-600-1212 (USA) Fax: 847-600-6446 Email: info@shure.com www.shure.com ©2011 Shure Incorporated Europe, Middle East, Africa: Shure Europe GmbH Jakob-Dieffenbacher-Str. 12, 75031 Eppingen, Germany Phone: 49-7262-92490 Fax: 49-7262-9249114 Email: info@shure.