User manual

ManualsBrandsShure ManualsMicrophonesActive Antenna Splitter

Table Of Contents

General Description

Antenna Distribution Systems send the RF signal from a single pair of anten-

nas to multiple receivers. Ultra-linear amplification and adjustable attenuation

optimize performance in difficult RF environments. Selectable input filters

match the available frequency bands of transmitters, providing extra protection

from strong out-of-band signals. BNC antenna output pairs distribute band-

filtered signals to up to 4 receivers. A pair of wideband cascade ports supply

wideband RF signals to Spectrum Managers or additional antenna distribution

amplifiers. Networking allows Wireless Workbench to control filtering ranges

and attenuation. For added flexibility, Axient Antenna Distribution Systems

are compatible with Shure ULX-D and UHF-R receivers.

To maximize use of the RF spectrum, Antenna Distribution Systems are

available in the following frequency ranges:

• AXT630 (470-698 MHz)

• AXT631 (606-814 MHz)

• AXT632 (470-510 MHz and 630-787 MHz)

Note: Instructions in this system guide apply all models of Axient Antenna

Distributions Systems.

Features

• Selectable input filtering provides system-wide protection against strong

out-of-band signals

• Wideband filtering option covers multiple bands

• Up to 15 dB of selectable RF attenuation for signal-to-noise optimization

• Front panel interface and Wireless Workbench 6 software control provide

easy setup and control of filtering, antenna power, and attenuation

• BNC outputs: 4 antenna output pairs

• Wideband RF cascade port with selectable 3 dB make-up gain for con-

necting wideband devices

• Ethernet Networking: 2 PoE enabled Ethernet ports

• IEC power ports enable daisy-chaining of AC power

Mounting Instructions

This component is designed to fit into an audio rack.

WARNING: To prevent injury this apparatus must be securely attached to

the rack.

Controls and Connectors

power

SET

2 3

AXT631

606-814 MHz

Antenna Distribution

antenna

B A

5 6

7 9

AXT631

4B 3B 2B 1B

RF outputs

4A 3A 2A 1A

RF outputs

PoE Class 1

① LCD Display

Displays menu and settings.

② Navigation Buttons

• Arrows: Scroll menus and change settings

• Set: Enables menu edits and saves changes

Tip: Press and hold the Set button for 1 second to activate the Hardware Identify feature in Wireless Workbench.

AXT630

Antenna Distribution System

Summary of content (9 pages)

PAGE 1
AXT630 Antenna Distribution System General Description Antenna Distribution Systems send the RF signal from a single pair of antennas to multiple receivers. Ultra-linear amplification and adjustable attenuation optimize performance in difficult RF environments. Selectable input filters match the available frequency bands of transmitters, providing extra protection from strong out-of-band signals. BNC antenna output pairs distribute bandfiltered signals to up to 4 receivers.
PAGE 2
AXT630 Antenna Distribution System Shure Incorporated ③ Power Switch Powers the unit on or off ④ AC Power Primary Switch AC Main Power Switch ⑤ AC Power In IEC Connector, 100-240 V AC ⑥ AC Power Cascade Use the IEC extension cables to connect up to 5 devices to a single AC power source. ⑦ Network Speed LED (amber): • Off = 10 Mbps • On = 100 Mbps ⑧ Ethernet Ports (2) PoE Class 1 enabled.
PAGE 3
AXT630 Antenna Distribution System Shure Incorporated The RF outputs distribute the signal from a pair of antennas to up to 4 receivers or additional antenna distribution systems. Port-to-port isolation reduces interference, making the distribution ports the best option for distributing signal to additional devices. Connecting Devices Connect an A and B pair of RF outputs from the Antenna System to the A and B inputs of the device. RF outputs RF outputs 4B 3B 2B 4A 1B 3A 2A antenna in 1A 12.
PAGE 4
AXT630 Antenna Distribution System Shure Incorporated Multiple Levels of Antenna Distribution For large configurations, multiple Antenna Distribution Systems can be layered to support several levels of signal distribution: • Two levels of antenna distribution are possible if the level 1 and level 2 Antenna Distribution Systems have the Cascade ports activated • Up to 3 levels of antenna distribution are possible if only the level 1 Antenna Distribution System has the Cascade ports activated • For bes
PAGE 5
AXT630 Antenna Distribution System Shure Incorporated Antenna Cascade Antenna Power Auto The ports will activate when a connected device supplies 12-15 V DC to the port. ON The antenna ports supply 12-15 V DC to power active antennas. On The ports are continuously active, independent of voltage applied by a connected device. OFF Turns off DC voltage at the antenna ports. Network Status Active Indicates connectivity with other devices on the network.
PAGE 6
AXT630 Antenna Distribution System Shure Incorporated 3. Press Set to enable editing, and then use the arrow buttons to select a speed option. 4. Press Set to save, and then simultaneously press and hold the ▲ and ▼ buttons to return to the main menu. Firmware Updates Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are developed to incorporate additional features and enhancements.
PAGE 7
AXT630 Antenna Distribution System Shure Incorporated Configuration Unbalanced, active Band Filters AXT630 AXT631 AXT632 Wideband 470–698 MHz Band G1 470–530 MHz Band H4 518–578 MHz Band J5 578–638 MHz Band L3 638–698 MHz Wideband 606–814 MHz Band K4E 606–666 MHz Band M8 666–730 MHz Band P8, P9 710–790 MHz Band Q5 740–814 MHz Wideband 470–787 MHz Band G7C 470–510 MHz Band L3E 638–698 MHz Band M8 666–730 MHz Band P9 710–787 MHz Impedance 50 Ω Bias Voltage 12 V DC, 150 mA
PAGE 8
AXT630 Antenna Distribution System Shure Incorporated Output Intercept Point >25 dBm, typical Cascade Output Connector Type BNC (1 pair) Configuration Unbalanced, wideband Impedance 50 Ω Insertion Loss <5 dB Accessories Cables Furnished Accessories 2-foot Coaxial Antenna Cable (RG-58) UA802 (12) IEC AC Power Cable (1) 95A9128 IEC AC Extension Cable (1) 95A9129 Shielded 3-foot Ethernet Cable (1) C803 Shielded 8-inch Ethernet Jumper Ca- C8006 ble (1) Hardware Kit (1) 90XN1371 22-inch Coaxial Cable* (1
PAGE 9
AXT630 Antenna Distribution System Shure Incorporated 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus. 11. ONLY USE attachments/accessories specified by the manufacturer. 17. The airborne noise of the Apparatus does not exceed 70dB (A). 12.