User's Guide
Table Of Contents
- BLXWireless System
- IMPORTANT SAFETY INSTRUCTIONS
- System Components
- Quick Start Guide
- Features
- Single System Set Up
- Setting Transmitter Group and Channel
- Multiple System Setup
- Manually Setting Receiver Group and Channel
- Locking and Unlocking Controls
- Tips to Improve Wireless System Performance
- Getting Good Sound
- Adjusting Gain
- Batteries
- Wearing the Bodypack Transmitter
- Power Off
- Removing and Installing Identification Caps
- Troubleshooting
- Specifications
- System
- Working Range
- Audio Frequency Response
- Total Harmonic Distortion
- Dynamic Range
- Operating Temperature
- Polarity
- BLX1
- Audio Input Level
- Gain Adjustment Range
- Input Impedance
- RF Transmitter Output
- Dimensions
- Weight
- Housing
- Power Requirements
- Battery Life
- Audio Input Level0dB-20 dBV maximum-10dB-10 dBV maximumGain Adjustment Range10 dB RF Transmitter Output10 mW, typical varies by region Dimensions8.82 in. X 2.09 in. (224 mm X 53 mm) L x Dia. Weight7.7 oz. (218 g) without batteries HousingMolded ABS Power Requirements2 LR6 AA batteries, 1.5 V, alkaline Battery Lifeup to 14 hours (alkaline)
- Audio Input Level
- Gain Adjustment Range
- RF Transmitter Output
- Dimensions
- Weight
- Housing
- Power Requirements
- Battery Life
- BLX4 & BLX88
- Output Impedance
- Audio Output Level
- RF Sensitivity
- Image Rejection
- Dimensions
- Weight
- Housing
- Power Requirements
- Certifications
- Important Product Information
- Frequency Range and Transmitter Output Level
Shure Incorporated
16/25
Dynamic Range
100 dB, A-weighted, typical
Operating Temperature
-18°C (0°F) to 57°C (135°F)
Note: Battery characteristics may limit this range.
Polarity
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces
positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch
output.
BLX1
Audio Input Level
max -16 dBV maximum
min (0 dB) +10 dBV maximum
Gain Adjustment Range
26 dB
Input Impedance
1 MΩ
RF Transmitter Output
10 mW, typical
varies by region
Dimensions
4.33 in. X 2.52 in. X 0.83 in. (110 mm X 64 mm X 21 mm) H x W x D
Weight
2.6 oz. (75 g), without batteries
Housing
Molded ABS
Power Requirements
2 LR6 AA batteries, 1.5 V, alkaline