User's Guide
Table Of Contents
- BLXWireless System
- IMPORTANT SAFETY INSTRUCTIONS
- System Components
- Quick Start Guide
- Features
- Single System Set Up
- Setting Transmitter Group and Channel
- Multiple System Setup
- Manually Setting Receiver Group and Channel
- Locking and Unlocking Controls
- Tips to Improve Wireless System Performance
- Getting Good Sound
- Adjusting Gain
- Batteries
- Wearing the Bodypack Transmitter
- Power Off
- Removing and Installing Identification Caps
- Troubleshooting
- Specifications
- System
- Working Range
- Audio Frequency Response
- Total Harmonic Distortion
- Dynamic Range
- Operating Temperature
- Polarity
- BLX1
- Audio Input Level
- Gain Adjustment Range
- Input Impedance
- RF Transmitter Output
- Dimensions
- Weight
- Housing
- Power Requirements
- Battery Life
- Audio Input Level0dB-20 dBV maximum-10dB-10 dBV maximumGain Adjustment Range10 dB RF Transmitter Output10 mW, typical varies by region Dimensions8.82 in. X 2.09 in. (224 mm X 53 mm) L x Dia. Weight7.7 oz. (218 g) without batteries HousingMolded ABS Power Requirements2 LR6 AA batteries, 1.5 V, alkaline Battery Lifeup to 14 hours (alkaline)
- Audio Input Level
- Gain Adjustment Range
- RF Transmitter Output
- Dimensions
- Weight
- Housing
- Power Requirements
- Battery Life
- BLX4 & BLX88
- Output Impedance
- Audio Output Level
- RF Sensitivity
- Image Rejection
- Dimensions
- Weight
- Housing
- Power Requirements
- Certifications
- Important Product Information
- Frequency Range and Transmitter Output Level
Shure Incorporated
3/25
•
•
•
•
•
•
•
•
•
•
1. 1.
2.
2.
3. 1.
This symbol indicates that there are important operating and maintenance instructions in the
literature accompanying this unit.
WARNING: Danger of explosion if incorrect battery replaced. Operate only with AA batteries.
System Components
Note: Your system comes with a combination of the following components.
BLX1 Bodypack Transmitter
BLX2 Handheld Transmitter (choice of SM58, BETA58A, or PG58)
BLX4 Wireless Receiver
BLX88 Dual Wireless Receiver
PS24 Power Supply
Lavalier microphone (choice of PG185, WL185 or WL93)
Headworn microphone (choice of PG30, SM31FH or SM35)
MX153 Earset microphone
Instrument microphone (BETA98H/C)
Guitar cable (WA302)
Quick Start Guide
Connect receiver to power source.
Connect receiver to mixer or amplifier. Hold power button to turn on.
Press group button on receiver to perform a group scan.
Install batteries and turn on transmitter.