DL4 DuraPlex™ Lavalier Microphones The Shure DuraPlex Lavalier online user guide. Version: 0.
Shure Incorporated Table of Contents DL4 DuraPlex™ Lavalier Microphones General Description Features Threaded Mount Instructions 6 Accessories 7 3 3 Furnished Accessories 7 3 Optional Accessories 7 Replacement Parts 8 Wiring and Termination 9 Typical Wiring Table 9 Care and Maintenance 3 DuraPlex Accessories 3 Presence Cap 4 Attaching the Windscreen 4 Tie Clip 5 Dual Tie Clip 6 Sticky Mount 6 Lavalier Distance 6 MTQG Connector Assembly Specifications Frequency Response Cert
Shure Incorporated DL4 DuraPlex™ Lavalier Microphones General Description The Shure DuraPlex DL4 is a professional MEMS condenser lavalier microphone that is ideal for both speech and perfor mance applications in challenging environments. The IP57 rated omnidirectional lavalier is dust resistant and waterproof, man ufactured for use in applications that require extended durability, uncompromised sound quality, and reliability.
Shure Incorporated DuraPlex Accessories Presence Cap Frequency Response Attaching the Windscreen There are two windscreens for use with the DuraPlex microphone: 1.
Shure Incorporated 2. A snap-fit windscreen for use without the presence cap Note: Do not use the snap-fit windscreen with the presence cap--the presence cap can become caught inside the snap-fit windscreen.
Shure Incorporated Dual Tie Clip Sticky Mount Lavalier Distance 6/13
Shure Incorporated Threaded Mount Instructions Accessories Furnished Accessories Furnished Acces sories DL4 Black DL4 Tan DL4 Cocoa DL4 White Single Tie Clip 95A43715 95C43715 95D43715 95A43715 Presence Cap 65A44182 65B44182 65C44182 65D44182 Snap-Fit Windscreen 95A16167 95B16167 95C16167 95D16167 Foam Windscreen 95A43438 95B43438 95C43438 95D43438 Sticky Mount 66A44183 66A44183 66A44183 66A44183 Case 95A44074 95A44074 95A44074 95A44074 Threaded TA4F Adapter 95A29490
Shure Incorporated TA4F/TQG XLR Preamplifier RPM400TQG Lemo XLR Preamplifier RPM400LEMO Black Dual Tie Clip, qty.1 95A44848 White Dual Tie Clip, qty.1 95B44848 Tan Dual Tie Clip, qty.1 95C44848 Cocoa Dual Tie Clip, qty.1 95D44848 Replacement Parts RPMDL4WS/B FOAM WINDSCREEN, BLACK, QTY. 5 RPMDL4WS/C FOAM WINDSCREEN, COCOA, QTY. 5 RPMDL4WS/T FOAM WINDSCREEN, TAN, QTY. 5 RPMDL4WS/W FOAM WINDSCREEN, WHITE, QTY.
Shure Incorporated RPMDL4DTC/B DUAL TIE CLIP, BLACK, QTY. 3 RPMDL4DTC/C DUAL TIE CLIP, COCOA, QTY. 3 RPMDL4DTC/T DUAL TIE CLIP, TAN, QTY. 3 RPMDL4DTC/W DUAL TIE CLIP, WHITE, QTY. 3 RPMDL4FC/B DL4/DH5 FREQ CAP, BLACK, QTY. 5 RPMDL4FC/C DL4/DH5 FREQ CAP, COCOA, QTY. 5 RPMDL4FC/T DL4/DH5 FREQ CAP, TAN, QTY. 5 RPMDL4FC/W DL4/DH5 FREQ CAP, WHITE, QTY. 5 RPMDL4SM DL4 STICKY MOUNT, QTY.
Shure Incorporated Series Cable Con struc tion DL4MTQG 1.
Shure Incorporated Specifications Note: • All specification values are based on using a typical bodypack with 5 V bias input or the RPM400MTQG preamplifier. When using the RPM400LEMO amplifier, refer to the RPM400LEMO specifications. • All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity. Microphone Capsule MEMS Polar Pattern Omnidirectional Frequency Response 20 Hz to 20 kHz Sensitivity -42.
Shure Incorporated Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 LEMO Cable Diameter 1.6 mm Cable Length 66 in. (1.67 m) Net Weight DL4 15.0 g(0.53 oz.) DH5 20.0 g(0.7 oz.
Shure Incorporated Certifications Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per formance. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str.
