User Manual

Band Range Transmitter output*
G4 470 - 494 MHz 30 mW
G4E 470 - 494 MHz 10 mW
G5 494 - 518 MHz 30 mW
G5E 494 - 518 MHz 10 mW
H5 518 - 542 MHz 30 mW
H5E 518 - 542 MHz 10 mW
J3 572 - 596 MHz 30 mW
K3E 606 - 630 MHz 10 mW
L4 638 - 662 MHz 30 mW
L4CN 638 - 662 MHz 30 mW
L4E 638 - 662 MHz 30 mW
P4 702 - 726 MHz 30 mW
P4CN 702 - 726 MHz 30 mW
Q24 736 - 754 MHz 30 mW
R13 794 - 806 MHz 20 mW
R19 794 - 806 MHz 10 mW
R5 800 - 820 MHz 20 mW
JB 806 - 810 MHz 10 mW
S6 838 - 865 MHz 10 mW
X4 925 - 932 MHz 10 mW
* Conductive into 50 ohms
6
Specifications
Working Range
Line of Sight
100 m (300 ft)
Note: Actual range depends on RF signal ab-
sorption, reflection and interference.
Tonekey 32.768 kHz
Audio Frequency Response 45 to 15000 Hz (±2 dB)
Note: Dependent on microphone type
Total Harmonic Distortion
Ref. ±38 kHz deviation with 1 kHz tone
<0.5%, typical
Dynamic Range >100 dB, A-weighted
Operating Temperature Range -18°C (0°F) to +57°C (135°F)
Note: Battery characteristics may limit this
range.
FP1
Gain Adjustment Range −10 to +20 dBV
Input Impedance 1MΩ
RF Output Power 10 to 30 mW
varies by region
Pin Assignments
TA4M
1: ground (cable shield)
2: + 5 V Bias
3: audio
4: Tied through active load to ground (On
instrument adapter cable, pin 4 floats)
Dimensions 108 mm x 64 mm x 19 mm (H x W x D)
Weight 81 g (3 oz.), without batteries
Housing Molded polycarbonate case
Power Requirements LR6 AA batteries, 1.5 V
Battery Life up to 11 hours (alkaline)
FP2
Maximum Input Level at –10 dB gain setting: +2 dBV
at 0 dB gain setting: –8 dBV
Gain Adjustment Range 10 dB
RF Output Power 10 to 30 mW
varies by region
Dimensions 254 mm X 51 mm dia. (10 X 2 in.)
Weight 290 g (10.2 oz.) without batteries
Housing Molded PC/ABS handle and battery cup
Power Requirements LR6 AA batteries, 1.5 V
Battery Life up to 11 hours (alkaline)
FP3
Gain Adjustment Range 0 to +40 dBV
Input Impedance 9kΩ
RF Output Power 10 to 30 mW
varies by region
Dimensions 117 x 36 x 43 mm (H x W x D)
Weight 160 g (5.6 oz.), without batteries
Power Requirements LR6 AA batteries, 1.5 V
Battery Life up to 12 hours (alkaline)
FP5
Dimensions 108 mm X 64 mm X 19 mm (H x W x D)
Weight 81 g (3 oz.)
Housing Molded polycarbonate case
Sensitivity –108 dBm for 12 dB SINAD, typical
Power Requirements LR6 AA batteries, 1.5 V
Battery Life up to 12 hours (alkaline)
Audio Output
Type TA3F
Configuration Impedance balanced
Pin Assignments 1=ground, 2=hot, 3=cold
Maximum Audio Output Level
Ref. ±38 kHz deviation with 1 kHz tone
–5 dBV (into600Ωload)
Impedance 200Ω
Frequency Range and Transmitter
Output Power
NOTE: This Radio equipment is intended for use in musical professional
entertainment and similar applications. This Radio apparatus may be
capable of operating on some frequencies not authorized in your region.
Please contact your national authority to obtain information on autho-
rized frequencies and RF power levels for wireless microphone products.