(j) LEGENDARY pERFORM AN c ETM GLX-D Wireless Syste m- GLXD4 Receiver User Gu1de Le GUide de I'UI11isateur Bed1enungsanle1tu ng Manual do Usuano Gu1a del Usuano Gu1da deii'Utente Gebru1kershandle1d1ng fao! c€& © 2017 Shure Incorporated 27A35795 (Rev.
Half-Rack Wireless Receiver ·--··- ·- - - - - -- - -...·-IMPORTANT SAFETY INSTRUCTIONS • .. -~------~·-····~-- 1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 13. UNPLUG this apparatus during lightning storms or when unused for long periods of time. 6. CLEAN ONLY with dry cloth. 14. REFER all servicing to qualified service personnel.
System Overview ---- ····' . ... ~ ' ~- . GLX-D Advanced Digital Wireless Systems combine Automatic Frequency Management technology with a rack mountable metal receiver, rechargeable lithium-ion batteries, world-renowned microphones, and unparalleled design and construction. New GLX-D Advanced Frequency Managers (available separately) connect multiple GLXD4R receiver systems for increased channel count and improved RF reliability, consolidating RF to one pair of antennas.
Receiver Controls and Connectors @ SitU~ GLXD4R antennaS antenna A Front Panel Rear Panel CD RF Status LED ON = Linked transmitter is on. Flashing = Searching for transmitter. OFF= Linked transmitter off or transmitter unlinked. ® Group Button Press and hold for two seconds to enable manual group edit. ® Data Sync LED ON = Data sync is on (receiver connected to GLX-D Frequency Manager). Flashing = Searching for frequencies. OFF= Data sync is off (receiver not connected to GLX-D Frequency Manager).
Transmitters ~ ~ G) Antenna Carries wireless signal. ®Status LED LED color and state indicate transmitter status. l• ®Power Switch Turns the transmitter on/off. @ TA4M Input Jack Connects to a 4-Pin mini connector (TA4F) microphone or instrument cable. WI [.7 ® Micro USB Charging Port Connect to USB battery charger.
- - ------- Batteries and Charging GLX-D transmitters are powered by Shure SB902 lithium-ion rechargeable batteries. Advanced battery chemistry maximizes runtimes with zero memory effects, eliminating the need to discharge batteries prior to charging. When not in use, recommended battery storage temperature is 10oc (50°F) to 25°C (77°F). Note: The transmitter will not pass RF or audio signals when connected to the charging cable.
Remote Antenna Placement -- ~---~ -..-"·- ---~----~---~···~-----~-----~~~ ~ ···~---·~·---- Follow these guidelines when mounting antennas remotely: Reduce distance between transmitter and antenna. Mount antennas farther from each' other to improve performance. Position antennas so there is nothing obstructing the line of sight to the transmitter, including the audience. Keep antennas away from metal objects and any other antennas. Use only low-loss reverse SMA cable to avoid poor RF signal.
2.4 GHz Spectrum Overview .. .... ........ -- -~- · · ··· · --· ·· ·· -•" "" ·~······ ·"'"" "~· --· ·· · ~· ~-~ - ~ ~ -·~- · - - · "' "" '~·· ··~ ·". GLX-D operates within the 2.4GHz ISM band which is utilized by Wi-Fi, Bluetooth, and other wireless devices. The benefit of 2.4GHz is that it's a global band that can be used anywhere in the world, license free. Overcoming the Challenges of 2.4 GHz Coexisting with Wi-Fi The challenge of 2.4 GHz is that Wi-Fi traffic can be unpredictable.
Operation - -Gain Adjustment Use the gain buttons on the receiver to increase or decrease the gain of a linked transmitter: SHU~ GLXD4R • Turn on the linked transmitter and momentarily press the gain buttons to adjust the gain in 1 dB increments rf group ': 0,---------, ® DO link channel ' - -- - - - - - . . J • For faster gain adjustments, press and hold the gain buttons • To replicate the output level of a guitar, unity gain is -18 dB for the V.
. ' Firmware additional features and enFirmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are developed to incorporate Utility tool. hancements. To take advantage of design improvements, new versions of the firmware can be downloaded and installed using the Shure Update Software is available for download from http://www.shure.com/update-utility.
Troubleshooting Issue Indicator Status Solution No sound or faint sound Receiver RF LED on • Verify all sound system connections or adjust gain as needed (see Adjusting Gain). • Verify that the receiver is connected to mixer/amplifier. Receiver RF LED off • • • • Receiver LCD screen off • Make sure AC adapter is securely plugged into electrical outlet. • Make sure receiver is powered on. Transmitter indicator LED flashing red Charge or change transmitter battery.
Specifications ---·--'"" """"''"~··· ~ ··~~ •·•·••·~""" "··"• •· ,, ~ • -. - •• -·~~~-·~··•~~ ··"'' • ~••••~ • ~·· - ~ •••w Tuning Bandwidth T A4M Connector 2400-2483.5 MHz Working Range 5V DC Up to 30 m (100ft) typical, Up to 60 m (200 ft) maximum Up to 20m (65ft) typical, Up to 50 m (165ft) maximum Audio Input Note: Actual range depends on RF signal absorption, reflection and interference.
Meets essential requirements of the following European Directives: Audio Output WEEE Configuration I Ba)anced I Impedance balanced XLR Output 6.35 mm (1/4") output I 100 Q 6.35 mm (1/4") output I 2002/96/EC, as amended by 2008/34/EC Note: Please follow your regional recycling scheme for batteries and electronic waste Hereby, Shure Incorporated declares that the radio equipment is in compliance with Directive 2014/53/EU.
SHURE® LEGENDARY PERFORMANCE'" United States, Canada, Latin America, Caribbean: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone:+ 1 847-600-2000 Fax: + 1 847-600-1212(USA) Fax:+ 1 847-600-6446 Email: info@shure.com www.shure.com Europe, Middle East, Africa: Shure Europe GmbH Jakob-Dieffenbacher-Str. 12, 75031 Eppingen, Germany Phone: +49-7262-92490 Fax: +49-7262-92491 14 Email: info@shure.de www.shure.
SHUiQ: A Firmware Update May be Required Une mise iljour du firmware peul itre demand8e Elne Flrmware-Aktuallslerung kann erforderllch seln Puede ser necesarlo actuallzar el firmware Potrebbe essere rlchlesto l'agglornamento del firmware Shure periocUcally updates device firmware to add features and improve system performance.
LIMITED WARRANTY Shure Incorporated ("Shure") hereby warrants to the original consumer purchaser only that, except as otherwise specified below, this product will be free in normal use of any defects in materials and workmanship for a peripd of two (2) years from the consumer's original date of purchase directly from Shure or from a Shure-authorized reseller.
SHU:PF~ Service Centers United States, Canada, Latin America, Carribbean Shure Incorporated Attn: Service Department 945 Chaddick Dr. Wheeling, IL 60090-6449 Europe, Middle East, and Africa Shure Europe GmbH Attn : Service Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Asia Shure Asia Limited 22/F, 625 King's Road North Point, Island East Hong Kong Attention: Service Department Phone: (852) 2893-4290 Fax: (852) 2893-4055 Email: info@shure.com.
