User Manual

ManualsBrandsShure ManualsElectronicsShure GLXD4 Single Channel Wireless Receiver, Z2

December 2014, this device will comply if it is operated in the 520-820 MHz

frequency band. WARNING: After 31 December 2014, in order to comply,

this device must not be operated in the 694-820 MHz band.

WARNING: This product contains a chemical known to the State of California

to cause cancer and birth defects or other reproductive harm.

System Overview

The new groundbreaking GLX-D Wireless Systems from Shure combine the

leading edge of Automatic Frequency Management technology with best-in-

class intelligent lithium-ion battery rechargeability, world-renowned micro-

phones and unparalleled design and construction. Available in a wide offering

of bodypack and handheld configurations - including vocal, headset and

presenter systems as well as traditional guitar options. The revolutionary

GLX-D Wireless Systems define the newest standard for seamless ease of

operation and exceptional digital audio clarity.

• Exceptional digital audio clarity

• Operates in 2.4 GHz spectrum, available worldwide

• Rechargeable batteries deliver cost-efficiency and up to 16 hours of

runtime

• Adjustable transmitter gain to optimize audio signal

• Automatically moves away from interference without audio interruption

• RF back-channel for remote control of transmitter functions

• Globally-unlicensed 2.4 GHz frequency band allows operation of up to

4 compatible systems in a typical setting and up to 8 compatible systems

under ideal conditions

• Automatic transmitter power-off to conserve battery life when transmitter

is not in use

Accessories

Furnished Accessories

PS43Power Supply

95E16526Carrying Case

SB902Shure Lithium-Ion Rechargeable Battery*

95A21651USB Cable, Type A to Micro-B*

* Only included with GLXD14 or GLXD24 systems.

Optional Accessories

SBC-CARCar Battery Charger

SBC10-902Stand Alone Single Battery Charger

WA582BBlack Bodypack Pouch

Quick Start

To reduce set up time, the transmitter and receiver automatically link to form an audio channel the first time they are powered on and never have to be linked

again.

Note: When setting up multiple receiver systems, turn on and link each transmitter/receiver pair one at a time to prevent cross-linking.

Step ①

Connect power supply to the receiver and plug cord into an AC power source. Connect the audio output to an amplifier or mixer.

Shure IncorporatedGLXD4 Wireless Receivers

2017/10/232/19