MV7 Podcast Microphone The Shure Hybrid USB/XLR cardioid microphone, MV7, user guide. Version: 1.
Shure Incorporated Table of Contents Advanced Mic Settings MV7 Podcast Microphone 3 MV7 Tips General Description Features Connect Your MV7 Quick Setup Touch Panel Interface Controls The MV7 Microphone MV7 Outputs Mounting Instructions Windscreen Auto Level Mode 11 3 Control your Levels 11 3 Use Lock Mode to Lock In Your Sound 11 Monitor Your Sound 11 3 4 Troubleshooting 11 4 Firmware Update 12 5 5 5 5 6 Keep equipment connected during updates System Requirements 12 12 System Requiremen
Shure Incorporated MV7 Podcast Microphone General Description The Shure MV7 is a professional-quality USB dynamic microphone, ideal for close mic applications that require vocal intelligibility with a balanced tone. The attractive and durable all-metal design features an adjustable yoke that can be mounted onto a variety of microphone stands for flexible placement options. A touch panel user interface provides control of microphone gain, headphone level, monitor mix blend and muting.
Shure Incorporated Quick Setup 1. Use the correct cable to plug the microphone into your computer. The LEDs on the MV7 will pulse when the connection is made. 2. Download the app at https://wwww.shure.com/MOTIVdesktop. Your computer may request permission to use the external device the first time the app is opened. 3. Select your microphone from the drop down menu. Access customized controls for your MOTIV microphone. 4. Check audio levels and adjust microphone settings.
Shure Incorporated ③ Volume Control Slider Adjust microphone or headphone level by swiping your finger several times up and down the control surface. ④ Monitor Toggle Press the mode/headphone button to toggle between microphone (green) and headphone (orange) volume controls. Long press to activate monitor mix controls (both green and orange). Another long press to return to separate microphone and headphone volume controls. ⑤ Lock Indicator Displays whether the settings lock is on or off.
Shure Incorporated Mounting Instructions The MV7 microphone comes equipped with a 5/8"-27 threaded mount, the thread size most commonly found on microphone stands. This mount can be used with a microphone stand or hung from a boom. Some stands may require an adapter, which is not provided. Note: Be very careful not to unloosen the screws all the way. To easily flip the microphone orientation, loosen the screws and rotate 180 degrees.
Shure Incorporated Near For podcast and voice recording applications. Position the MV7 in front of and as close to your face as possible. Speak directly into the mic, 1-6 inches (2.54 - 15 cm) away for a more intimate voice sound with maximum rejection of off-axis sounds. Speaking closer to the microphone results in more bass response, similar to voices on a radio broadcast. Make additional gain adjustments if necessary.
Shure Incorporated Additional Tips Shure offers educational articles and publications on recording techniques for a variety of instruments and applications. Visit Shure Educational Articles for more information. The Shure MOTIV Desktop App Use the Shure MOTIV desktop app to quickly adjust microphone settings. The device stores the most recently used settings for quick setup.
Shure Incorporated ⑦ Mic Position Select the distance, Near or Far, from the sound source to the microphone. ⑧ Tone Fine tune your audio by selecting Dark, Natural or Bright tone. Tone controls a variety of settings to quickly dial in your sound. Mic Setup: Manual ① Settings Click the three dots to access MOTIV software information, manage presets, application preferences and check for firmware updates. ② Mic Selection/Settings Lock Use the drop-down menu to access settings for your microphone.
Shure Incorporated ⑥ Monitor Mix slider Move the slider to adjust the levels of mic and playback sound sources. See "Monitor Mix Blend" for more information on monitoring. ⑦ EQ Use the equalizer to add a high-pass filter, presence or both. Tap Flat to return to an unchanged equalization state. ⑧ Limiter and Compressor settings Fine tune your audio with limiter and compressor controls. See "Advanced Mic Settings" for more information.
Shure Incorporated Mode Characteristics Presence boost Highpass presence boost Combination high-pass filter and presence boost to improve definition and focus on clarity Advanced Mic Settings Fine-tune your sound with limiter, compression, and equalizer settings. Limiter Toggle the limiter on or off to prevent distortion from volume peaks in your recording. Compressor Choose no compression, or select light, medium or heavy compression to control volume when your sound source is dynamic.
Shure Incorporated Issue Solution cation is displaying the correct microphone. Audio is distorted (Auto Level Mode) Select Auto Level Mode to allow the software to control audio settings. Near for up-close applications (1-6 in. / 2.54-15 cm) and Far for a distance of 6-18 inches. (15-45 cm) Audio is distorted (Manual Mode) Audio distortion usually comes from overloading the microphone which causes clipping. Lower your mic gain for the best sound recording. Headphone LED flashes.
Shure Incorporated System Requirements System Requirements and Compatibility: Mac • • • • MacOS 10.13 to 10.15 64 bit Minimum 2 GB of RAM Minimum 500 MB of hard disk space System Requirements and Compatibility: Windows • • • • Windows 10 64 bit Minimum 2 GB of RAM Minimum 500 MB of hard disk space System Requirements and Compatibility: iOS • iOS: iOS 12 and higher • iPhone: iPhone 6 and higher • iPod Touch: 6th gen Note: iPad Pro (USB-C) is not supported.
Shure Incorporated Output Impedance 314 Ω Frequency Response 20 Hz to 20,000 Hz Adjustable Gain Range 0 to +36 dB Sensitivity (@ 1 kHz, open circuit voltage) -55 dBV/Pa [1] (1.78 mV), -47 dBFS/Pa [1] [2] Maximum SPL, Digital Output 132 dB SPL [2] Headphone Output 3.
Shure Incorporated Bit Depth Sampling Rate 24 48 kHz 24 44.1 kHz 16 48 kHz 16 44.1 kHz Typical Frequency Response Typical Polar Pattern Overall Dimensions MV7 Yoke Assembly The MV7 yoke allows a podcaster to be flexible with mic placement. Loosen the yoke knobs and you can adjust the microphone in a variety angles.
Shure Incorporated rect order to ensure that your microphone is secure. Each side uses one thin gray spring washer, one shiny silver brass washer, two black plastic washers and the yoke and threaded yoke knob. 1. Start with the threaded knob flat side down on your tabletop. 2. Stack the washers on the threaded knob. ◦ Place a black plastic washer on the knob. ◦ Place one side of the yoke on next. ◦ Then put the second black plastic washer on.
Shure Incorporated Accessories Furnished Accessories 10 foot Micro-B to USB-A cable 95A45110 10 foot Micro-B to USB-C cable 95B38076 Replacement Parts Black Windscreen AMV7-K-WS Silver Windscreen AMV7-S-WS Optional Accessories 1 m Lightning cable AMV-LTG Certifications Information to the user This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2.
Shure Incorporated the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna.
Shure Incorporated Android Compatibility This equipment is compatible with Android devices that support USB Audio Class 2.0 and USB-C connectivity. Not all Android devices are compatible. Android is a trademark of Google Inc.
CONNECT VIA XLR If using the MV7 via XLR. simply connect the microphone to an audio interface or mixer and start creating.
CONNECT VIA use If using the MV7 v ia USB, you will need to download the ShurePlus MOTIV App for ultimate control (available at Shure.
Adjust microphone gain and headphone volume Mic Lock Indicator use TOUCH PANEL 0 0 0 0 0 0 0 0 0 - ..................... .. .. ..... .. .... + When using the MV7 via USB you can control the microphone using the touch panel.
TOUCH PANEL OPERATION TOGGLE: MICROPHONE\ HEADPHONE • LOCK / UNLOCK TOUCH PANEL MONITOR MIX TAP to toggle between Microphone Gain and Headphone Volume, then dial in your preferred settings by SLIDING your hnger along the touch panel. HOLD for 2 seconds to access Monitor • Mix, then dial in your preferred mix. • + A V HOLD BOTH for 2 seconds to lock/unlock touch panel TOGGLE: MUTE / UNMUTE MICROPHONE 0 2. • 00 00 @t··..····..·····..········..·..····.. ~® 1. 0 6l 1. I . ...
CONTROL The most exciting and unique feature of the ShurePlus MOTIV App is Auto Level Mode. Your voice and mic position are always changing. Auto Level Mode sets your gain perfectly 1n real-time, so your output level stays consistent. This allows you to focus on your content. not your m1c technique and gives your audience a more consistent listening experience.
SHURE® SAFETY PRECAUTIONS SAFETY PRECAUTIONS 0 Before using this product, please read and save the enclosed warnings and safety instructions. PRECAUTIONS DE SECURITE Avant d'utillser ce produit, pn~re de hre les avertissements et cons,gnes de secunte ci-joints el de les conserver. YKA3AHHA no TEXHHKE 6E3OnACHOCTH npe>K.Qe '48M nonbsoealbCR 3TI4M M3.aenHeM, npo!.4KTaHre H coxpaHMTe npH11araOMble npe.aynpe)t(,Q8HHA M )'K333HMR no T8)(HMK8 SICHERHEITSVORKEHRUNGEN ' 6esonacHOCTM.
'll~ -R-21 Attt PRECAUZIONI 01 SICUREZZA ~~~ I poss,bth effet11 dt un uso erralo sono contrassegnau da uno dei due s,mboh "AVVERTENZA" e • ATTENZIONE" sulfa base dell'1mm1nenza del pericolo e della gravua del danno & & & & &* & & & ~.:rr• ~]!; 01 'l.!eL./c:t AVVERTENZA : Ignorare quest! messaggI puO comportare lesionI personali gravI o mortah m conseguenza d1 un lunz1onamento errata.
® LIMITED WARRANTY Illllll lllll llllll llll 111111111111111 11111111 ~'!I © 2018, Shure Incorporated 27F3175 (Rev. 4) ti~ I Printed in China. 1.16.GSl31 .00501 .
LIMITED WARRANTY Shure Incorporated ("Shure") hereby warrants to the original consumer purchaser only that, except as otherwise specified below, this product will be free in normal use of any defects in materials and workmanship for a period of two (2) years from the consumer's original date of purchase directly from Shure or from a Shure-authorized reseller.
FOR ORIGINAL PURCHASES IN AUSTRALIA ONLY LIMITED WARRANTY AGAINST DEFECTS Shure Incorporated ("Shure") hereby warrants to the original consumer purchaser in Australia only that, except as otherwise specified below, this product will be free in normal use of any defects in materials and workmanship for a period of two (2) years from the consumer's original date of purchase directly from Shure or from a Shure-authorized reseller.
SHUR,E® Service Centers United States, Canada, Latin America, Carribbean Shure Incorporated Attn: Service Department 945 Chaddick Dr. Wheeling, IL 60090-6449 Europe, Middle East, and Africa Shure Europe GmbH Attn: Service Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Asia Shure Asia Limited 22/F, 625 King's Road North Point, Island East Hong Kong Attention: Service Department Phone: (852) 2893-4290 Fax: (852) 2893-4055 Email: info@shure.com.hk ii 4,,DJ I _;.
INFORMATION TO USER This device complies wi1t'h part 1,5, of the Fc,c Rules . Operation is subJect to the following two conditions,: (1) Th'is device may not cause harmful interference, and (2) this device must accept any interference, rec,aived, including interference that may cause undes,ired operation~ This Class a Digital apparatus complies with Canadian ICE'S.003. CET APPAREIL NUMERIQU,E DE LA CLASSE B EST CONFORME A LA NORME NMB-003 DU CANADA. 27A45996 (A,ev.