User Manual

ManualsBrandsSHURE ManualsStudio & RecordingAudio interface

General Description

The Shure MVi is a compact digital audio interface used to connect a micro-

phone, guitar, or other instrument to a computer or mobile device. Audio and

power are delivered through a single USB or Lightning

connection to provide

a simple and portable recording solution. The MVi headphone output delivers

the microphone/instrument signal for real-time monitoring, in addition to audio

from the computer for playback and overdubbing.

Features

• Easily adjust settings with the intuitive touch panel interface

• Compatible with most iDevices (iPhone, iPad, and iPod) through Light-

ning

interface

• Compatible with most computers, tablets and smart phones through USB

interface

• Sleek design includes all-metal housing for professional-grade durability

• Headphone output allows real-time monitoring of the live signal and audio

from the computer or device

• Preset DSP modes include equalization and compression settings for

specific applications

Overview

②

③

①

④

① USB connection

The MicroUSB port on the MVi rear panel connects it to a computer or mobile

device through a USB or Lightning connection. Both power and audio are

passed through this connection.

② Microphone or Instrument

A microphone, instrument, or line source plugs into the combo XLR-¼" input.

③ Headphone Monitoring

Connect headphones to hear real-time audio from the microphone and audio

playback from the computer.

④ Controls

The MVi touch-panel provides control of microphone gain, headphone level,

and recording mode selection.

Quick Setup

The MVi is compatible with most devices that have a USB or Lightning con-

nector.

1. Connect the MVi to a computer or mobile device. Use the appropriate

cable (USB or Lightning).

Drivers will be installed automatically. The touch panel illuminates to in-

dicate a successful connection.

2. The MVi is automatically assigned as the active audio device.

If MVi is not the selected audio device, open the sound control panel and

select the Shure MVi driver.

3. Adjust the headphone volume on the MVi device driver.

Open the Shure MVi driver from the sound control panel and raise the

headphone volume from the playback or output tab.

4. Plug a microphone or instrument into the input on the rear panel.

The XLR/TRS combo input is compatible with microphones, guitars, in-

struments, and other line-level sources.

Note: Condenser microphones require phantom power to operate. To

turn on phantom power, press and hold the mute button for 3 seconds.

The PH PWR LED on the rear panel illuminates when phantom power

is activated.

Caution: Never activate phantom power if using a ribbon microphone,

as this may cause damage to the microphone.

5. Use the MODE button to select the preset mode that fits your appli-

cation and adjust the microphone gain to suit the application.

If the audio is too quiet or causes distortion, adjust the gain manually.

Refer to the "Adjusting Microphone Level" topic in this guide for more

details.

Note: When using the MVi, you can monitor and listen to playback

through the device headphone output.

6. Plug in headphones to monitor the real-time audio and playback.

Pressing the headphone button changes to volume control slider to adjust

the headphone volume (LEDs switch from green to orange when adjusting

headphone volume).

Note: Do not use the gain adjustment to get more volume from the

headphones.

You are ready to record.

Touch Panel Interface Controls

௢

௟

௠

௡

Touch Panel

① Volume Control Slider

Adjust microphone or headphone level by sliding your finger across the

control surface.

• Press the mode button to activate microphone level.

• Press the headphone button to activate headphone volume.

MVi

Digital Audio Interface

Summary of content (5 pages)

PAGE 1
MVi Digital Audio Interface General Description The Shure MVi is a compact digital audio interface used to connect a microphone, guitar, or other instrument to a computer or mobile device. Audio and ® power are delivered through a single USB or Lightning connection to provide a simple and portable recording solution. The MVi headphone output delivers the microphone/instrument signal for real-time monitoring, in addition to audio from the computer for playback and overdubbing.
PAGE 2
MVi Digital Audio Interface Shure Incorporated ② LED bar Displays microphone and headphone level. The LED color indicates the level being displayed or adjusted. • Green: Microphone level • Orange: Headphone level ③ Mute Button Press to mute and unmute the microphone. ③ Micro-USB Port Connects to a computer or mobile device with the appropriate cable. ④ Phantom Power Indicator Illuminates when active (press and hold mute for 3 seconds to switch on/off).
PAGE 3
MVi Digital Audio Interface Shure Incorporated Accessing the Control Panel PC 1. Open the sound control panel and select the Recording tab. 2. Open the Shure MVi device. 3. Under the Levels tab, adjust the volume using the slider. ® Mac 1. Open the Audio Midi Settings panel. 2. Select the Shure MVi device. 3. Click on Input to adjust the gain using the slider.
PAGE 4
MVi Digital Audio Interface Shure Incorporated Sample Rate and Bit Depth settings are found in a drop down menu in the audio or sound control panel of your computer. You can adjust these variables to fit your needs. Select a lower sample rate for podcast recording, when it is important to have a smaller file for easy download. Select a higher sample rate for music and more dynamic recordings.
PAGE 5
MVi Digital Audio Interface Shure Incorporated Housing Dimensions all metal construction 42 x 84 x 72 mm H x W x D Net Weight Cable 310.0 g (10.93oz.) 1 m USB cable, 1 m Lightning cable 0 Accessories Furnished Accessories 1 m USB cable AMV-USB 1 m Lightning cable AMV-LTG Certifications Information to the user This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.