User's Manual

General Description
The Shure MOTIV MVL is an omnidirectional condenser lavalier microphone,
featuring a 3.5 mm (1/8") Tip Ring Ring Sleeve (TRRS) plug for use with a
portable recording-capable device. By plugging the MVL microphone into
the headphone jack of a smartphone or tablet and opening recording apps
such as the ShurePlus
®
MOTIV recording app, the user can easily and dis-
cretely capture high-quality audio. It is ideal for use in speech and other ap-
plications requiring minimal visibility.
Features
Superior audio clarity
Effective immunity to audible interference
Low self-noise
More even, natural response across frequency range
Less susceptible to distortion
Matte black, sleek, low-profile design for inconspicuous placement
Snug-fit foam windscreen provides additional protection from plosives
and wind noise
Includes protective storage pouch, tie clip, and windscreen
The optional Rycote™ Mini Windjammer fits over the included windscreen
Legendary Shure quality and reliability
Using the Microphone
15-25cm
(6-10in.)
1. Install the supplied snug-fit windscreen by sliding it over the microphone capsule.
Note: Do not pull the windscreen too tightly over the microphone. Leave a small space inside the windscreen to allow for air movement.
2. Attach the microphone to a shirt or other garment using the supplied tie clip. For best results, the microphone should be 15-25 cm (6-10 in.) away from the
mouth.
3. Plug the 3.5 mm (1/8") plug into your recording device.
To further reduce plosives and wind noise, use the optional Rycote™ Mini Windjammer, which fits over the included foam windscreen.
Specifications
Microphone Capsule
MEMS
Polar Pattern
Omnidirectional
Frequency Response
40 Hz to 20,000 Hz (see frequency response graph)
Output Impedance
350 Ω
1/3©2018 Shure Incorporated
MVL
Omnidirectional Condenser Lavalier Microphone

Summary of content (3 pages)