User Manual

Shure Incorporated
59/102
Setting RF Power
The RF radius of a configuration can be limited to allow another MXW system to reuse the frequency timeslots. It is best prac
tice to use the lowest setting that supports the installation. Perform a walk-around test with the transmitters to ensure that the
coverage setting is sufficient.
The RF Power is set from the Preferences tab of the control software. The setting applies to each access point in the Configu
ration. Reference the following table for setting the RF Power.
RF Power Levels
Setting Transmitter Power (mW)
Coverage Distance from
APT
Typical Application
Max 80 150 ft
Ballroom and auditorium
spaces
High 16 100 ft
Large meeting spaces and
lecture halls
Medium (default) 3 50 ft
Conference, training and
multipurpose rooms
Low 1 25 ft
Small video-conference
rooms and boardrooms
RF Coverage
Optimal Placement of the Access Point