User Manual

Shure Incorporated
61/102
4.
5.
6.
7.
8.
9.
Note that the APT is set to Mode A by default (Device View > RF Mode Settings > RF Coordination Mode). Close
out of the window.
Open the Device Properties for the adjacent APT2 or APT4.
Set the unit to Mode B (Device Propterties > RF Mode Settings > RF Coordination Mode).
Select Add Updates to save the setting and close the window.
Make sure any additional APTs are set to alternating RF Coordination modes.
Select Apply All button on the Utility page to update all device settings.