User's Manual

Shure Incorporated
69/97
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
① Export Button
Exports MXW device data to a text file (.csv).
② Device
The device type or microphone channel.
APT: Access point transceiver; also displays the selected channel density mode (SD = standard, HD = high)
NCS: Network charging station, up to two per group (A or B)
Mic 1 - 8: Microphone for channels 1-8, up to two microphones per channel (primary or secondary)
Out: Device is not associated or linked to a group
③ Group
Indicates the device's status in a Group:
1 - 10: Device is associated to that Group in the Configuration
Open: Device is not associated to any group
None: Microphone is linked to an Access Point that has been removed from a group (deselected from the Group row in the
Configuration tab)
Standalone: Audio Network Interface is set to Standalone mode, which restricts association to an APT group
Unknown: Microphone is linked to an APT that is powered off or connected to a different network
Other: Device is associated to a Group in a different Configuration
④ Device Model
The device model number.
⑤ Device Name
Displays device name as defined in the Configuration tab or channel name as defined in the Monitor tab.
⑥ IP Address
Displays the IP Address of the control network interface (Shure control data).
⑦ IP Address Network Audio
Displays the IP Address of the Network Audio network interface (Dante digital audio data).
⑧ Battery Capacity
The microphone battery's percentage of charge capacity as compared to a new battery.
⑨ Cycle Count
Number of charge cycles logged by the battery.
⑩ Firmware Version
Displays the device's firmware version.
⑪ Device Properties
Opens a window for editing the properties of an individual device. The button displays yellow when the properties have
been edited for that device. The changes can be applied or cancelled from the Pending Changes Button on the Utility tab.
⑫ Pending Changes Buttons