Owner's Manual
Table Of Contents
- PSM300 User Guide
- PSM300 Stereo Personal Monitor System Online User Guide
- Table of Contents
- PSM300Stereo Personal Monitor System
- Important Product Information
- PSM®300
- PSM®300
- Hardware
- System Applications
- System Setup and Configuration
- Operation
- Troubleshooting
- Specifications
- RF Carrier Range
- Compatible Frequencies
- Tuning Bandwidth
- Operating Range
- Audio Frequency Response
- Signal-To-Noise Ratio
- Total Harmonic Distortion
- Companding
- Spurious Rejection
- Latency
- Frequency Stability
- MPX Pilot Tone
- Modulation
- Operating Temperature
- RF Output Power
- RF Output Impedance
- Net Weight
- Dimensions
- Power Requirement
- Audio Input
- Connector Type
- Polarity
- Configuration
- Impedance
- Nominal Input Level
- Maximum Input Level
- Pin Assignments
- Phantom Power Protection
- Audio Output
- Connector Type
- Configuration
- Impedance
- Active RF Sensitivity
- Image Rejection
- Adjacent Channel Rejection
- Intermodulation Attenuation
- Blocking
- Audio Output Power
- Minimum Load Impedance
- Headphone Output
- Output Impedance
- Net Weight
- Dimensions
- Battery Life
- Frequency Range and Transmitter Output Power
- Optional Accessories and Replacement Parts
- Certifications
- PSM®300 Personal Monitor Wireless System Frequency Supplement
- PSM300 Personal Monitor System Product Info
- P3RA User Guide
- P3RA Professional Bodypack Receiver Safety Information
- SE215 Manual
- Rack Mount Hardware Kit Instruction Sheet
- AA Battery Insertion for Bodybacks
- A Quick Guide to Personal Monitor Systems
- Warranty
- Safety Precautions
www.shure.com ©2016 Shure Incorporated
Component Specifications
P3T Wireless Transmitter
Dependable wireless transmission and 24-bit digital audio deliver a superior personal monitoring mix for every performance. Send 2 channels of audio to a
bodypack receiver up to 300 feet away, with patented Audio Reference Companding to ensure transparent sound quality with no artifacts or dropouts. The
rugged, half rack transmitter features easy front-panel controls including one-touch sync and input level knob to enable quick setup and easy operation.
Rear-panel balanced inputs and loop outputs provide versatile connectivity to audio sources and other P3T units.
• Single channel, half-rack transmitter with included rack mount kit
• Sends a stereo or mono mix wirelessly to performers onstage
• Rock-solid wireless connection to P3R receiver over 300 ft (90 m) range
• One-touch IR sync instantly links transmitter to receiver
• Up to 30 mW output power (region dependent)
• 24 MHz tuning range (region dependent)
• ¼" (6.3 mm) TRS balanced inputs and loop outputs
• High-contrast LCD menu with detailed L/R audio output meters
• Detachable antenna
• External power supply
• Selectable line/aux level
Overview
Product Specifications
P3T Front Panel
P3T Back Panel
RF Output Power 10, 20, 30 mW
Note: varies by region
RF Output Impedance 50 Ω (typical)
Net Weight 783 g (27.6oz.)
Dimensions 43 × 198 × 172 mm (1.7 × 7.8 × 6.8 in.), H × W × D
Power Requirements 12–15 V DC, 260 mA maximum
Audio Input
Connector Type 6.35 mm (1/4") TRS
Polarity Tip positive with respect to ring
Configuration Electronically balanced
Impedance 40 kΩ (actual)
Nominal Input Level Switchable, +4 dBu, -10 dBV
Maximum Input Level +4 dBu: +22 dBu
-10 dBV: +12.2 dBu
Pin Assignments Tip=hot, Ring=cold, Sleeve=ground
Phantom Power Protection Up to 60 V DC
Audio Output
Connector Types 6.35 mm (1/4") TRS
Configuration Electronically balanced
Impedance Connected directly to inputs