Owner's Manual
Table Of Contents
- PSM300 User Guide
- PSM300 Stereo Personal Monitor System Online User Guide
- Table of Contents
- PSM300Stereo Personal Monitor System
- Important Product Information
- PSM®300
- PSM®300
- Hardware
- System Applications
- System Setup and Configuration
- Operation
- Troubleshooting
- Specifications
- RF Carrier Range
- Compatible Frequencies
- Tuning Bandwidth
- Operating Range
- Audio Frequency Response
- Signal-To-Noise Ratio
- Total Harmonic Distortion
- Companding
- Spurious Rejection
- Latency
- Frequency Stability
- MPX Pilot Tone
- Modulation
- Operating Temperature
- RF Output Power
- RF Output Impedance
- Net Weight
- Dimensions
- Power Requirement
- Audio Input
- Connector Type
- Polarity
- Configuration
- Impedance
- Nominal Input Level
- Maximum Input Level
- Pin Assignments
- Phantom Power Protection
- Audio Output
- Connector Type
- Configuration
- Impedance
- Active RF Sensitivity
- Image Rejection
- Adjacent Channel Rejection
- Intermodulation Attenuation
- Blocking
- Audio Output Power
- Minimum Load Impedance
- Headphone Output
- Output Impedance
- Net Weight
- Dimensions
- Battery Life
- Frequency Range and Transmitter Output Power
- Optional Accessories and Replacement Parts
- Certifications
- PSM®300 Personal Monitor Wireless System Frequency Supplement
- PSM300 Personal Monitor System Product Info
- P3RA User Guide
- P3RA Professional Bodypack Receiver Safety Information
- SE215 Manual
- Rack Mount Hardware Kit Instruction Sheet
- AA Battery Insertion for Bodybacks
- A Quick Guide to Personal Monitor Systems
- Warranty
- Safety Precautions
www.shure.com ©2016 Shure Incorporated
P3R Wireless Bodypack Receiver
Component Specifications
P3R Wireless Bodypack Receiver
The P3R is a wireless stereo bodypack receiver for use with the PSM®300 Personal Monitor System. With 24-bit digital audio clarity
and up to 300 ft of range (90 m), the P3R offers reliable wireless freedom that covers every corner of the stage. Simply connect
a set of earphones and adjust the controls to create a wireless personal mix. Patented Audio Reference Companding ensures the
clearest sound, with ultra-low noise and no artifacts. Use MixMode® technology to customize the mono blend from two channels of
audio, or select stereo mode and adjust the left/right balance as desired. One-touch frequency scan and automatic frequency selec-
tion enables quick setup and connection to a P3T transmitter via IR sync.
• Slim, lightweight, durable form factor
• Frequency scan and IR sync quickly finds and assigns a clean channel
• MixMode
®
technology enables adjustment of two independent monitoring mix levels
• Stereo mode enables adjustment of left/right balance
• Easy to adjust volume knob and mix control
• 2 AA batteries provide up to 6 hours of continuous operation
• Power save mode preserves battery life when earphones are not connected
• Power and battery status LED
Overview
Specifications
Active RF Sensitivity
(at 20 dB SINAD)
2.2 μV
Image Rejection >90 dB
Adjacent Channel Rejection >60 dB
Intermodulation Attenuation >50 dB
Blocking >60 dB
Audio Output Power
1 kHz @ <1% distortion, peak power, @32 Ω
80 mW (per output)
Minimum Load Impedance 16 Ω
Headphone output 3.5 mm (1.8") stereo
Net Weight 98 g (3.5 oz.)
(without batteries)
Dimension 110 × 64 × 21 mm H × W × D
Battery Life
(continuous use)
5–7 hours, AA batteries