User Manual

RF Settings
The RADIO menu contains selectable GROUP and CHANNEL settings,
which are used to manually synchronize the receiver with the transmitter.
The frequency and band are displayed below the group and channel settings
for reference.
MixMode and Stereo Monitoring
The bodypack can operate in either of the following listening modes:
Stereo (default)
To operate in stereo mode, enter the menu and select AU-
DIO>MODE>STEREO .
In stereo mode, audio from channel 1 is heard on the left earphone, while
audio from channel 2 is heard on the right earphone. Listening in stereo in-
creases clarity and separation between the sources on each channel.
Left (Channel 1)
Right (Channel 2)
Adjusting Balance
To adjust the left/right balance, select AUDIO>BAL ST. Use the ▲▼ buttons
to change the setting.
MixMode
To operate in MixMode, enter the menu and select AUDIO>MODE>MIX-
MODE.
In MixMode, the blend between two monitoring mixes (an instrumental mix
and a vocal mix, for example) is adjustable. The signal is mono, which means
each mix is heard through both the left and right earphones.
Adjusting mix blend
To adjust the blend between channel 1 and channel 2, enter the menu and
select AUDIO>BAL MX. Use the arrow buttons (▲▼) to make adjustments.
In this scenario, an instrumental mix is on channel 1 (left) and a vocal mix is
on channel 2 (right):
To hear more of channel one (instruments),
shift the balance towards the left.
MIXMODE
10L
Instruments Vocals
To hear more of channel one (instruments), shift the balance towards the
left.
Instruments
Vocals
To hear more of channel two (vocals), shift
the balance towards the right.
MIXMODE
10R
Instruments Vocals
To hear more of channel two (vocals), shift the balance towards the right.
Shure IncorporatedP3RA Professional Wireless Bodypack Receiver
2017/10/304/7