User's Manual

Shure Incorporated
12/21
2. Press channel button to scan for a clear channel
3. System scans for the channel with the least interference
2. Synchronize: Synchronize the transmitter to the receiver by aligning the infrared (IR) ports and pressing the
sync button. Make sure the IR ports are closely aligned. After a successful sync, the transmitter LED mo-
mentarily flashes red and the receiver ready light illuminates.
This wireless system may be affected by RF interference when used in proximity to other wireless devices such as
cordless phones, baby monitors, and two-way radios. For best results, use the scan and sync feature before each
use or if you experience problems.
Multiple System Setup
Use the following steps to ensure the best performance when installing multiple wireless systems at the same lo-
cation.
1. Turn all receivers on and all transmitters off.
Turn on any other digital equipment that could cause interference during the performance so it will be detected
during the frequency scans in the following steps.
2. Make sure the group number is the same for all receivers (see Manual Group Selection).
3. Perform a scan using the first receiver.