Quick start Guide
Shure Incorporated
10/60
•
•
•
•
•
•
For best results, the belt should be pressed against the base of the clip.
Hardware Interface
Receiver Front and Back Panels
① Display Shows menu options, receiver and transmitter settings.
② Arrow Buttons Adjust gain setting or change menu parameters.
③ Enter Button Press to save menu or parameter changes.
④ Sync Button Press to activate IR sync.
⑤ Power Switch Powers receiver on or off.
⑥ Audio LED Green = normal
Yellow = signal approaching limiter threshold
Red = limiter engaged to prevent clipping
⑦ Menu Button Press to access or select menu screens
Press to cancel pending changes
Press and hold to return to the home screen
⑧ RF LED Illuminates when RF link with transmitter is active.