Quick start Guide

Shure Incorporated
18/60
•
•
•
•
•
•
•
•
•
④ frequency Use the arrow buttons to adjust the frequency. Press and hold for faster scrolling.
⑤ lock Select a lock option:
On = controls locked
OFF = controls unlocked
⑥ rf power Select an rf power setting:
Lo = 1 mW
Hi = 10 mW
⑦ mic offset dB Use to match audio levels between two transmitters used in a combo system.
Range is 0 to 21 dB (3 dB increments). Adjustments occur in realtime.
⑧ battery type Use to set the battery type to match the installed AA battery type to ensure accurate
battery metering. Menu is not displayed when Shure SB900 batteries are installed.
Tips for Editing Menu Parameters
To access the menu options from the home screen, press the menu button. Each additional press of the
menu button advances to the next menu screen.
A menu parameter will blink when editing is enabled
To increase, decrease or change a parameter, use the arrow buttons
To save a menu change, press enter
To exit a menu without saving a change, press menu
Control Lock Options for the Receiver and Transmitter
Control lock options are available for both the receiver and the transmitter to protect against accidental or
unauthorized changes. Locks can be directly set from the component menu, or remotely set from WWB6. To
maintain protection, controls remain locked when the transmitter is turned off and turned on.