Quick start Guide

Shure Incorporated
34/60
Viewing the Receiver in WWB6 Inventory
Click on the Inventory tab to view the receiver channels. Double-click on parameters to enable editing.
Tip: Clicking on the receiver icon next to the channel name flashes the front panel LEDs on the receiver for remote
identification.
Hardware Identify
When Hardware Identify is triggered from a receiver, the corresponding representation of that receiver is flashed in
the WWB inventory display, allowing for remote identification.
Hardware Identify can be triggered from the receiver by pressing and holding the enter button for at least 3 seconds.
Click the Dismiss button on the WWB Inventory screen to exit the function.
Firmware Updates
Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware
are developed to incorporate additional features and enhancements.
Firmware Versioning
When updating receiver firmware, update transmitters to the same firmware version to ensure consistent operation.
The firmware version is numbered in the form of MAJOR.MINOR.PATCH (e.g., 1.2.14). At a minimum, all devices on
the network (including transmitters), must have the same MAJOR and MINOR firmware version numbers (e.g.,
1.2.x).