User's Manual

Shure Incorporated
21/61
◦
◦
•
•
•
•
•
⑥ rf power
Select an rf power setting:
Lo = 1 mW
Hi = 10 mW
⑦ mic offset dB
Use to match audio levels between two transmitters used in a combo system. Range is 0 to 21 dB (3 dB increments). Ad
justments occur in realtime.
⑧ battery type
Use to set the battery type to match the installed AA battery type to ensure accurate battery metering. Menu is not dis
played when Shure SB900 batteries are installed.
Tips for Editing Menu Parameters
To access the menu options from the home screen, press the menu button. Each additional press of the menu button ad
vances to the next menu screen.
A menu parameter will blink when editing is enabled
To increase, decrease or change a parameter, use the arrow buttons
To save a menu change, press enter
To exit a menu without saving a change, press menu
Control Lock Options for the Receiver and Transmitter
Control lock options are available for both the receiver and the transmitter to protect against accidental or unauthorized
changes. Locks can be directly set from the component menu, or remotely set from WWB6. To maintain protection, controls re
main locked when the transmitter is turned off and turned on.