Owner's Manual

Adding a Charger

To save space and reduce clutter, up to 4 chargers can share 1 power supply.

1. Unplug charger from the power source.

2. Insert set screws into the power pass-through connector.

3. Align units and tighten screws using the supplied alien wrench.

Important: Do not overtighten.

4. Repeat above steps to add additional chargers.

5. Connect DC power cable

any input jack on the bottom of the charger.

Note: One PS60 will supply power to up to four chargers.

Charging

To charge, place batteries into the charging bays with slotted sides down. The LEDs illuminate to indicate battery status.

arqinq

St t

LED s

Description

LED Color State

Ready for Use

✓

Green

Charged (99-100%)

✓

Green and Red Charging (90-99%)

Charging

mum

Red

Charging (0- 90%}

Warning

•

Yellow Battery cannot be charged*

* Battery might be too hot

too cold to take a charge.

Note: Store batteries in the charger

in a proper container. To protect terminals from shorting, DO NOT place batteries

a box or

pocket with metal objects such as nails, screws,

keys.