User manual

Shure Incorporated
8/11
Monitoring Batteries with Wireless Workbench
Wireless Workbench provides detailed information for batteries currently docked in the charger. You can also view
battery error notifications and change the charger's network settings.
Click the Inventory tab to view your charger in Wireless Workbench. The charger properties panel provides differ
ent battery statistics:
Charge
Displays charge as a percentage of the total battery capacity. Also shows time remaining to full charge.
Health
Displays health of selected battery as a percentage of the charge capacity of a new battery. Charge capacity (bat
tery life when fully charged) will decline as a result of repeated charge cycles, age, or storage conditions.
Cycle
Displays total number of times that the battery has undergone one full count of discharge and charge. Recharging
after discharging halfway counts as one half of a cycle. Recharging after discharging a quarter of the way counts
as one quarter of a cycle.
Temperature
Displays battery temperature (in Celsius and Fahrenheit) and status.
Charger Network Settings
To adjust charger network settings, open the charger properties panel in Wireless Workbench. Click the gear icon
to set the IP mode and IP address, view the MAC address, and view firmware version.
Connecting to an External Control System
The SBC840 networked charging station connects to external control systems such as AMX or Crestron via the
Ethernet. For a comprehensive list of command strings, visit pubs.shure.com/guide/SBC840 (http://
pubs.shure.com/guide/SBC840).
• Connection: Ethernet (TCP/IP; SBC840 is the client)
• Port: 2202
Specifications
SBC840
Battery Type
Up to 8 SB910/SB920