Model SCM262 User Guide SCM262 STEREO MIXER MELANGEUR STEREO STEREOMISCHER MEZCLADORA ESTEREOFONICA MIXER STEREO ©2012 Shure Incorporated 27 A 15638 (Rev. 2) 11111111111111111111111111111111111111111111111111 A( E Printed in U.S.A.
IMPORTANT SAFETY INSTRUCTIONS I 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
! WICHTIGE SICHERHEITSHINWEISE ! 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Diese Hinweise LESEN. Diese Hinweise AUFHEBEN. Aile Warnhinweise BEACHTEN. Aile Anweisungen BEFOLGEN. Dieses Geriit NICHT in der Nahe von Wasser verwenden. NUR mit einem sauberen Tuch REINIGEN. KEINE LOftungsoffnungen verdecken. Gemar.. den Anweisungen des Herstellers einbauen. Nicht in der Nahe von Warmequellen, wie Heizkorpern, Raumheizungen, Herden oder anderen Geraten (einschlieP..Iich Verstarkern) installieren, die Warme erzeugen.
I ISTRUZIONIIMPORTANTI PER LA SICUREZZA ! 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. EGGETE queste istruzioni. CONSERVATE queste istruzioni. OSSERVATE tulle le avvertenze. SEGUITE tulle le istruzioni. NON usate questa apparecchio vicino all'acqua. PULITE l'apparecchio SOLO con un panna asciullo. NON ostruite alcuna apertura per l'aria di raffreddamento. lnstallate l'apparecchio seguendo le istruzioni del costrullore.
SHURE SCM262 DESCRIPTION The SCM262 Stereo Mixer is designed for restaurants, classrooms, corporate training, aerobics classes, and other situations where a paging/ public announcement system is combined with background music or other program material. The Shure Model SCM262 is a stereo mixer intended for sound reinforcement applications that integrate microphones with consumer stereo products. It incorporates two active-balanced microphone inputs with three unbalanced stereo aux level inputs.
DIP SWITCHES • UP DIP SWITCH FUNCTION POSITION UP (default) DOWN 1 LEFT OUTPUT MIG/LINE Line Mic 2 RIGHT OUTPUT MIG/LINE Line Mic 3 MIC 1 DUCKING Off On 4 MIC 2 DUCKING Off On 5 DUCKING LEVEL -
CONNECTIONS MIC INPUT 2 WIRELESS MICROPHONE SYSTEM ~ ))))) ))))))))) MIC INPUT 1 MICROPHONE AUXINPUTS AUXINPUT 3 JUKEBOX AUXINPUTS TELEVISION E M/FM RECEIVER ) ~= l r1~ = L I OR R L 0 0 0 0 LIR AUX OUTPUTS POWER SUPPLY LIR MIC/LINE OUTPUTS .... I R 1: I I 1 I I L = w I I ='I'='= OR OR PROFESSIONAL AUDIO POWER AMPLIFIER VIDEO CAMERA - - - - - - - ...... '--~----..:-~-------..._I --~-- CONSUMER STEREO AMPLIFIER I I I I I l R .. !...... .
INTERNAL MODIFICATIONS WARNING! Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing and modifications to qualified service personnel. DISASSEMBLY To remove MIG 2/LINE 2 from the left outputs, remove R910. Toremove MIG 2/LINE 2 from the right outputs, remove R911. To access the printed circuit board (pc board) for internal modifications, use the following steps: 1. Unplug the power cord. 2. Remove the knobs and retainer nuts from the front panel.
INSTALLATION 2. Attach the short rackmount brackets to the outsides of the combined units with eight (8) of the bracket screws. SUPPLIED HARDWARE 4 rubber feet. For stand-alone installation. 1 rackmount bracket, long. For half-rack (single unit) installations. 1 rackmount bracket, short. For half-rack (single) or dual-mount installations. 2 straddle brackets. For dual-mount or fixed installations. 12 bracket screws, 1/ 4 -in. (6 mm). For securing the brackets to the chassis. 4 rackmount screws, 1 in. (2.
SPECIFICATIONS Ducking Measurement Conditions (unless otherwise specified):Tone controls centered; Line voltage 120 Vac, 60 Hz (SCM262) or 230 Vac, 50 Hz (SCM262E); full gain; 1 kHz, one channel activated ; source impedances: Mic 150 D ; Line/Aux 40 D , terminations: Line/Mic/Aux 20 kD. Mic channels 1 and 2 Levels .. .. .. ........... ............... ... . -20 dB or - ro dB Activation time .. .... .. ......... .. .. .. .... .. ..... .. ....... ............. ..... 10 ms (typical) Mic Deactivation time ....
SHU~E ® United States, Canada, Latin America, Caribbean: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: 847-600-2000 Fax: 847-600-1212 (USA) Fax: 847-600-6446 Email : info@shure .com www.shure.com ©201 1 Shure Incorporated Europe, Middle East, Africa: Shure Europe GmbH Jakob-Dieffenbacher-Str. 12, 75031 Eppingen, Germany Phone:49-7262-92490 Fax: 49-7262-92491 14 Email : info@shure.
Cable Connector Information Sheet CONNECTING YOUR DEVICES TO A SHURE MIXER The variety of connectors on audio equipment sometimes leads to confusion in wiring. The diagrams below provide wiring recommendations for most common cables. NOTE: XLR pin 1 is a/ways connected to cable shield. UNBALANCED CABLE BALANCED CABLE SHIELD SHIELD JACKET JACKET INSULATION INSULATION XLR CONNECTOR (ACTUAL SIZE) 0 0 0 XLR XLR TO MONO PHONE PLUG ( ~------•.D .... (ACTUAL SIZE) SLEEVE , 1..-.r---...
STEREO PHONE PLUG (USED AS A BALANCED LINE CONNECTION) OD (ACTUAL SIZE) ( RING I tC 0 1 ' ~ 'TIP SLEEVE STEREO PHONE PLUG TO XLR ~ ~ :, ?-rtJ-.. .,.," ', 3 3.5 MM (MINI) PHONE PLUG 10 (ACTUAL SIZE) 0 TO XLR ' TIP 3.5 MM PHONE PLUG PHONO PIN (RCA) PLUG (ACTUAL SIZE) 0 XLR SHUR.E* United States, Canada, Latin America, Caribbean: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: 847-600-2000 Fax: 847-600-1212 (USA) Fax: 847-600-6446 Email: info@shure.
LIMITED WARR·A NTY Shure lncorpo·rated ("Shure") hereby warrants to the original consumer purchaser only that, except as otherwise specified below, this product will be free in normal' use of any defects in materials and workmanship for a period of two (2) years from the consumer's original date of purchase directly from Shure or from a Shure-authorized reseller.
® SHU Service Centers United States, Canada, Lati~ America, Carribbean Shure Incorporated Attn: Service Department 5800 W. Touhy Avenue Niles, IL 60714-4608 U.S.A. Europe, Middle East, and Africa Shure Europe GmbH Attn: Service Jakob-Dieffenbacher-Str. 12 74078 Eppingen, Germany Asia Shure Asia Limited 22/F, 625 King's Road North Point, Island East Hong Kong Attention: Service Department Phone: (852) 2893-4290 Fax: (852) 2893-4055 Email: info@shure.com.
® LIMITED WARRANTY © 2012, Shure Incorporated 27E3175 (Rev. 1) f!J ~ I Printed in China 1.16.GSI31.00501.
