RMCE-TW1 Shure True Wireless Secure Fit Adapters The Shure True Wireless Secure Fit Adapters and earphone user guide.
Shure Incorporated Table of Contents Accessories RMCE-TW1 Shure True Wireless Secure Fit Adapters 3 AONIC 215 True Wireless Sound Isolating™ Earphones 3 The best sound starts with a good fit 3 To keep them sounding their best...
Shure Incorporated RMCE-TW1 Shure True Wireless Secure Fit Adapters AONIC 215 True Wireless Sound Isolating™ Earphones The best sound starts with a good fit • Select the sleeve that provides a snug fit (like earplugs). • Secure the adapter behind the ear to maintain a tight seal. To keep them sounding their best... • Clean regularly to remove debris and deposits. • Contact Shure Service and Repair to replace damaged product. Simply detach and return the broken earpiece for easy re placement.
Shure Incorporated Manual pairing 1. 2. 3. 4. 5. 6. 7. Turn off the earphones. Put the earphones on your head. Press and hold button on the right adapter. Continue to hold after you hear “Power on”. When you hear "Bluetooth pairing mode" (about 5 seconds), release the button. From your audio source, select "Shure TW1." After a pause (about 4 seconds) you will hear “Connected”. Press and hold the button on the left adapter until you hear "Power on".
Shure Incorporated Visit http://www.shure.com/earphones for replacement parts and important instructions on cleaning and maintenance. Button Using The Buttons Power on Power off 1. Press and hold the button on the right adapter until you hear "Power on". 2. Press and hold the button on the left adapter until you hear "Power on". Place the earphones back in the case.
Shure Incorporated or Press and hold the button on either adapter until you hear “Power off”. The other adapter automatically turns off. Power off manually Press either adapter button and hold until you hear "Power off" Pair Bluetooth From power on, Press and hold the button on the primary adapter for about 5 seconds until you hear "Bluetooth pairing mode".
Shure Incorporated Environment mode Environment mode allows you to accentuate the ambient noise around you. This is especially useful when you want to listen to music or are on a phone call, yet you still want to be aware of the sounds around you. To use environment mode: • Double press either adapter • Use the switch in the ShurePlus PLAY app In the ShurePlus PLAY app, you can adjust the environment mode across ten levels: Create Custom Presets Add new preset 1. Tap Settings > EQ to access the equalizer.
Shure Incorporated Duplicate a Preset 1. Select one of the five preset modes and tap Duplicate. 2. Tap the More Options 3 dots. Tap Edit EQ Preset. 3. There are three ways to adjust your equalizer. Tap the values to type in a specific number. Tap the - or + to adjust in larger increments. Or, tap and drag the numbered circles for bigger changes. 4. Tap the check mark to save your new customized preset. Use Screen Orientation to Adjust EQ Hold your device in portrait mode to enter numberical EQ parameters.
Shure Incorporated Use landscape for a close-up view of your EQ curves. Preset Modes Use presets to quickly access commonly used listening scenarios. Five selectable 4-band presets optimize settings for gain, equalization, and compression. Play a song and find the preset that you think suits the song best. Then adjust levels as need ed. Preset De-ess Flat Loudness Low Boost Vocal Boost Application Use to reduce sibilance in speech. Listen to your unprocessed tracks.
Shure Incorporated 2. Pair the earphones to your device using Bluetooth. Note: You will be asked to allow pairing the first time you connect PLAY to a Bluetooth device. 3. Connect to the ShurePlus PLAY app. Your earphones will automatically pair with the PLAY app when the Device tab is selected. 4. Ensure that both earphone modules are paired with the device. If both earphone modules do not automatically connect, tap the music tab and back into the device tab to connect. 5.
Shure Incorporated Charging the adapters 1. 2. 3. 4. Insert the adapters into the charging case to charge. The LED is red while charging. When fully charged, the LED turns green. Use the supplied USB-C cable to recharge the charging case. Warning: Before charging, ensure that the adapters and case are at room temperature, between 10 to 45°C (50 to 113°F). Note: Use this product only with an agency approved power supply which meets local regulatory requirements (for example, UL, CSA, VDE, CCC, INMETRO).
Shure Incorporated Low battery Slow blinking red Charging case LEDs Adapters charging Red Adapter charge complete Green, then LED turns off Charging case charging On bottom of charging case, white LEDs blinking until fully charged, then all LEDs remain on On bottom of charging case, 3 white LEDs: 67-100% charged Charging case battery status (push battery button) 2 white LEDs: 34 - 66% charged 1 white LED: 5 - 33% charged 1 white blinking LED: 0-4% charged Accessories Furnished Accessories MMCX TR
Shure Incorporated Antenna Type Integral antenna Antenna Gain -4.32 dBi (Left), -2.73 dBi (Right ) Supported Codecs Qualcomm aptX™, SBC, AAC Working Range 10 m Operating Temperature 0°C to 45°C (32°F to 113°F) Charging Temperature Range 0°C to 45°C (32°F to 113°F) Storage Temperature -10°C to 35°C (14°F to 95°F) SE215 Earphone Transducer Type Single Dynamic MicroDriver Sensitivity at 1 kHz 107 dB SPL/mW Impedance at 1 kHz 20 Ω Noise Attenuation up to 37 dB Frequency Range 21 Hz –17.
Shure Incorporated SAFETY PRECAUTIONS Before using this product, please read and save the enclosed warnings and safety instructions. WARNING FOR ALL EARPHONES! Use, clean, and maintain earphones according to manufacturer’s instructions. SAFETY PRECAUTIONS The possible results of incorrect use are marked by one of the two symbols—"WARNING" and "CAUTION"—depending on the imminence of the danger and the severity of the damage.
Shure Incorporated 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli fiers) that produce heat. DO NOT defeat the safety purpose of the polarized or grounding type plug.
Shure Incorporated Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa tion. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Shure Incorporated Environmentally friendly disposal Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valu able raw materials and the treatment of toxic substances.
Shure Incorporated ® Qualcomm aptX™ is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
Shure Incorporated time based on temperature, amount of time in storage, charging cycles, and other factors; hence reduction in battery capacity does not constitute a defect in material or workmanship. At its sole option, Shure will repair or replace the defective product and promptly return it to you.
Shure Incorporated Makasar (0411) 324652 In North America: Custom Earphone Sleeves Those who use earphones regularly for extended periods of time often find custom-fit molded sleeves offer the best comfort and sound isolation.Through a partnership between Shure Incorporated and Sensaphonics Hearing Conservation, custom sleeves are available for use with your Shure Sound Isolating™ Earphones. Please contact Sensaphonics for more information.