User Guide

ManualsBrandsShure ManualsEarbud HeadphonesShure SE846-BLU+BT1 Wireless Sound Isolating Earphones with Bluetooth Enabled Communication Cable

Sound Isolating™ Earphones

Shure Sound Isolating™ Earphones, built with balanced armature speakers,

deliver a detailed soundstage free from outside noise. The powerful and

stylish Shure SE earphones come with a detachable cable, adapters, a

durable carrying case, and interchangeable Sound Isolating sleeves for a

comfortable and personalized fit.

Choosing a Sleeve

Select an earphone sleeve that provides the best fit and sound isolation. It

should be easy to insert, fit comfortably, and easy to remove.

Soft Flex Sleeves: In small, medium, and large

sizes. Made from pliable rubber.

Soft Foam Sleeves: Compress the foam sleeve

between your fingers and insert into the ear canal.

Hold in place for about ten seconds while the foam

expands.

Triple-Flange Sleeves: If desired, use scissors to

trim the stem on the sleeve.

Wearing the Earphones

Wear them like earplugs. A good acoustic seal provides maximum bass.

1. Select a sleeve.

2. Twist and pull to remove. Push new sleeve on fully. Compress foam

sleeve slightly.

3. Insert firmly into ear. Wear cable over and behind ear. Tighten the cable

and take up slack by raising the cable cinch.

Important: If there seems to be a lack of low frequency response (bass),

this means that the earphone sleeve is not forming a tight seal. Gently push

the earphone deeper into the ear canal or try a different sleeve.

Warning: Do not push the earphone sleeve beyond the ear canal opening.

Wearing the cable over the ear and securing it behind the head can help

keep the earphones in place during physical activity.

Changing Sleeves

• Twist and pull to remove the sleeve from the nozzle.

• Slide on a new sleeve so that it completely covers the barb and the

nozzle.

Caution: If the barb or any of the nozzle is exposed, the sleeve is not prop-

erly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure

proper fit and performance, use only sleeves supplied by Shure (unless using

custom molded sleeves).

Removing the Earphones

Grasp the body of earphone and gently twist to remove.

SE846-V AMEU

Shure Earphones

Summary of content (5 pages)

PAGE 1
SE846-V AMEU Shure Earphones Sound Isolating™ Earphones Shure Sound Isolating™ Earphones, built with balanced armature speakers, deliver a detailed soundstage free from outside noise. The powerful and stylish Shure SE earphones come with a detachable cable, adapters, a durable carrying case, and interchangeable Sound Isolating sleeves for a comfortable and personalized fit. Choosing a Sleeve Select an earphone sleeve that provides the best fit and sound isolation.
PAGE 2
SE846-V AMEU Shure Earphones Shure Incorporated Note: Do not pull on cable to remove earphone. Detachable Cable You may need to detach the cable from the earphones to attach optional components or to replace the cable if it becomes damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent damage to the earphone and connector. • Do not use pliers or other tools. • Grasp the connector and the earphone as close as possible to where they join.
PAGE 3
SE846-V AMEU Shure Earphones Shure Incorporated Color Sound Signature Response Blue Balanced Neutral (as shipped) White Bright +2.5 dB, 1 kHz to 8 kHz Black Warm −2.5 dB, 1 kHz to 8 kHz Removing the Nozzle Note: The nozzle contains small parts. Choose a proper work surface before disassembly. 1. Place the nozzle key (included with earphones) over the nozzle. 2. Turn the key counter-clockwise to loosen and remove the threaded collar. 3. Pull gently on the nozzle with your fingers to remove. 4.
PAGE 4
SE846-V AMEU Shure Earphones Shure Incorporated 2. Insert the nozzle into the earphone, aligning the dots so it matches the keyed opening. 3. Place the threaded collar over the nozzle. After ensuring the threads are properly engaged, use the nozzle key to gently turn clockwise. Caution: There should be no resistance to turning the collar until fully threaded into the housing. Check the following: ⁃ The insert is fully seated in the nozzle. ⁃ The nozzle is properly seated in the housing (dots aligned).
PAGE 5
SE846-V AMEU Shure Earphones Shure Incorporated Road Case Use the included water resistant, crush resistant road case to store and transport your earphones. Precaution During Air Travel: • Pressure changes during air travel can create a vacuum seal of the case which may make it difficult to open. If this occurs, gently pry the case open using a coin or other flat surface. • To prevent this from occurring, place the attached carrying cord inside the case before closing and leave the left clasp open.