Quick start Guide

ManualsBrandsShure ManualsBluetooth HeadphonesSE846 Sound-Isolating Earphones with Bluetooth 5.0 and Wired Accessory Cables

General Description

Shure Sound Isolating™ Earphones, deliver a detailed soundstage free from

outside noise. The powerful and stylish Shure SE earphones come with a

detachable cable, adapters, a durable carrying case, and interchangeable

Sound Isolating sleeves for a comfortable and personalized fit.

Wearing the Earphones

The following are some suggested ways of wearing the earphones.

Over the ear in back

Wear the cable over the ear and secure it behind the head to help keep the

earphones in place during physical activity.

Tighten the cable and take up slack by raising the cable cinch.

Detachable Cable

You may need to detach the cable from the earphones to attach optional

components or to replace the cable if it becomes damaged. To prevent acci-

dental separation, the connector has a snug fit. Take special care to prevent

damage to the earphone and connector.

• Do not use pliers or other tools.

• Grasp the connector and the earphone as close as possible to where

they join.

• Pull straight apart—do not twist. Cable is a snap fit, not threaded.

Note: If you pull at an angle, the connector will not detach.

• Do not pull on the cable or put any pressure on the earphone nozzle.

• Listen for a click when connecting.

• When reattaching the cable, match the "L" and "R" markings. For clear

cables and earphones, match the color dots (Red=Right, Blue=Left).

Audible click when properly connected

Inserting the Earphones

Insert the earphones so they form a tight seal. The fit of the earphone can greatly affect sound quality.

SE215M

Shure Earphones

Summary of content (4 pages)

PAGE 1
SE215M Shure Earphones General Description Shure Sound Isolating™ Earphones, deliver a detailed soundstage free from outside noise. The powerful and stylish Shure SE earphones come with a detachable cable, adapters, a durable carrying case, and interchangeable Sound Isolating sleeves for a comfortable and personalized fit. Wearing the Earphones The following are some suggested ways of wearing the earphones.
PAGE 2
SE215M Shure Earphones Shure Incorporated Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is not forming a tight seal. Gently push the earphone deeper into the ear canal or try a different sleeve. Warning: Do not push the earphone sleeve beyond the ear canal opening. Changing Sleeves • Twist and pull to remove the sleeve from the nozzle. • Slide on a new sleeve so that it completely covers the barb and the nozzle.
PAGE 3
SE215M Shure Earphones Shure Incorporated Choosing a Sleeve Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably, and easy to remove. Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber. Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the ear canal. Hold in place for about ten seconds while the foam expands.
PAGE 4
SE215M Shure Earphones Shure Incorporated Impedance Frequency Range at 1 kHz 17 Ω SE215 Special Edition 21 Hz–17.5 kHz SE215 22 Hz–17.5 kHz Net Weight 30 g (1 oz.) Accessories For information about earphone accessories and other Shure products visit: Furnished accessories subject to change. www.shure.com Certifications This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained from: www.