User Guide

ManualsBrandsShure ManualsBluetooth HeadphonesSE846 Sound-Isolating Earphones with Bluetooth 5.0 and Wired Accessory Cables

1/7

SE846 -- Sound Isolating™ Earphones

Sound Isolating™ Earphones

Shure Sound Isolating™ Earphones, built with balanced armature speakers, deliver a detailed soundstage free

from outside noise. The powerful and stylish Shure SE earphones come with a detachable cable, adapters, a

durable carrying case, and interchangeable Sound Isolating sleeves for a comfortable and personalized fit.

Choosing a Sleeve

Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably,

and easy to remove.

Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber.

Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the

ear canal. Hold in place for about ten seconds while the foam expands.

Triple-Flange Sleeves: If desired, use scissors to trim the stem on the sleeve.

Wearing the Earphones

Wear them like earplugs. A good acoustic seal provides maximum bass.

1. Select a sleeve.

2. Twist and pull to remove. Push new sleeve on fully. Compress foam sleeve slightly.

3. Insert firmly into ear. Wear cable over and behind ear. Tighten the cable and take up slack by raising the cable

cinch.

Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is

not forming a tight seal. Gently push the earphone deeper into the ear canal or try a different sleeve.

Warning: Do not push the earphone sleeve beyond the ear canal opening.

Wearing the cable over the ear and securing it behind the head can help keep the earphones in place during phys-

ical activity.

Summary of content (7 pages)

PAGE 1
SE846 -- Sound Isolating™ Earphones Sound Isolating™ Earphones Shure Sound Isolating™ Earphones, built with balanced armature speakers, deliver a detailed soundstage free from outside noise. The powerful and stylish Shure SE earphones come with a detachable cable, adapters, a durable carrying case, and interchangeable Sound Isolating sleeves for a comfortable and personalized fit. Choosing a Sleeve Select an earphone sleeve that provides the best fit and sound isolation.
PAGE 2
Shure Incorporated Changing Sleeves • Twist and pull to remove the sleeve from the nozzle. • Slide on a new sleeve so that it completely covers the barb and the nozzle. Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves). Removing the Earphones Grasp the body of earphone and gently twist to remove.
PAGE 3
Shure Incorporated • Listen for a click when connecting. • When reattaching the cable, match the "L" and "R" markings. For clear cables and earphones, match the color dots (Red=Right, Blue=Left). Maintenance and Cleaning Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety. • Keep the earphones and sleeves as clean and dry as possible. • To clean sleeves, remove them from earphones, gently rinse in warm water and air dry.
PAGE 4
Shure Incorporated Interchangeable Nozzle Insert Three varieties of nozzle insert provide customizable frequency responses for a personalized listening experience. Use these instructions to replace or clean the nozzle insert. Nozzle Inserts Color Sound Signature Response Blue Balanced Neutral (as shipped) White Bright +2.5 dB, 1 kHz to 8 kHz Black Warm −2.5 dB, 1 kHz to 8 kHz Removing the Nozzle Note: The nozzle contains small parts. Choose a proper work surface before disassembly. 1. 2. 3. 4.
PAGE 5
Shure Incorporated Reassembling the Nozzle 1. Gently slide the insert into the nozzle. Important: The insert needs to be fully seated. Reposition until it slides in easily. Do not force. 2. Insert the nozzle into the earphone, aligning the dots so it matches the keyed opening. 3. Place the threaded collar over the nozzle. After ensuring the threads are properly engaged, use the nozzle key to gently turn clockwise.
PAGE 6
Shure Incorporated Airline Adapter The airline adapter accessory is a dual-mono adapter plug for compatibility with the in-seat entertainment systems on certain international airlines.
PAGE 7
Shure Incorporated • • • • • Airline adapter ¼-inch (6.3 mm) adapter Cable clip Nozzle removal key Nozzle inserts for custom frequency response For optional accessories, visit www.shure.com. Certifications This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained from: www.shure.