User's Manual
Table Of Contents
- Table of Contents
- SLX-D Wireless System
- IMPORTANT SAFETY INSTRUCTIONS
- WARNING
- Important Product Information
- Overview
- Set Up the Receiver
- Wearing the Bodypack Transmitter
- Hardware Interface
- Batteries and Chargers
- Sound Check and Gain Adjustment
- Sound Check and Gain Adjustment
- System Set Up
- Radio Frequency (RF) Settings
- Networking
- Firmware Updates
- Firmware Updates
- Mount the SLX-D Receiver in a Rack
- Accessories
- Specifications
- System
- RF
- RF Carrier Frequency Range
- Working Range
- RF Tuning Step Size
- Image Rejection
- RF Sensitivity
- Audio
- Latency
- Audio Frequency Response
- Audio Dynamic Range
- Total Harmonic Distortion
- System Audio Polarity
- Mic Offset Range
- Temperature Range
- Operating Temperature Range
- Storage Temperature Range
- SLXD4 / SLXD4D
- Dimensions
- Weight
- Housing
- Power Requirements
- RF Input
- Spurious Rejection
- Connector Type
- Impedance
- Phantom Power Protection
- Audio Output
- Gain Adjustment Range
- Configuration
- Impedance
- Full Scale Output
- Mic/Line Switch
- Networking
- Network Interface
- Network Addressing Capability
- Maximum Cable Length
- SLXD1
- Battery Type
- Dimensions
- Weight
- Housing
- Audio Input
- Connector
- Configuration
- Impedance
- Maximum Input Level
- Preamplifier Equivalent Input Noise (EIN)
- RF Output
- Antenna Type
- Occupied Bandwidth
- Modulation Type
- Power
- SLXD2
- Battery Type
- Dimensions
- Weight
- Housing
- Audio Input
- Configuration
- Maximum Input Level
- RF Output
- Antenna Type
- Occupied Bandwidth
- Modulation Type
- Power
- SB903
- Charge Voltage
- Charge Current
- Nominal Voltage
- Nominal Capacity
- Housing
- Charging Temperature Range
- Dimensions
- Weight
- SBC10-903
- Battery Charger
- DC Input Voltage Range
- Charge Current
- Charge Time
- Charge Voltage
- Operating Temperature Range
- Dimensions
- Weight
- Housing
- Power Supply
- Input Voltage Range
- Operating Frequency
- Maximum Input Power
- Output Voltage
- Maximum Output Power
- Operating Temperature Range
- SBC203
- Charge Current
- Charge Time
- External Power Supply
- Power Requirements
- Charging Temperature Range for Battery
- Dimensions
- Weight
- Housing
- Power Supply
- Input Voltage Range
- Operating Frequency
- Maximum Input Power
- Output Voltage
- Maximum Output Power
- Operating Temperature Range
- Receiver Output Connectors
- Transmitter Input
- Frequency Range and Transmitter Output Power
- Frequencies for European Countries
- Certifications
Shure Incorporated
2/43
Table of Contents
SLX-D Wireless System 3
IMPORTANT SAFETY INSTRUCTIONS 3
WARNING 4
Important Product Information 4
LICENSING INFORMATION 4
Australia Warning for Wireless 4
Overview 5
Features 5
System Components 6
Set Up the Receiver 8
Wearing the Bodypack Transmitter 9
Hardware Interface 10
Receiver Front and Back Panels 10
Navigating the Receiver Menus 11
Transmitters 13
Transmitter Menu Options and Navigation 15
Locking and Unlocking the Receiver Controls 15
Batteries and Chargers 16
Install Transmitter Batteries 16
Setting the AA Battery Type 17
Shure SB903 Rechargeable Battery 17
Average Charging Times 19
Sound Check and Gain Adjustment 19
System Set Up 20
Creating Audio Channels 20
What are Groups and Channels? 20
Using the Guided Frequency Setup 21
Manual Frequency Selection 22
Linking Two Transmitters to a Receiver 23
Adding SLX-D to Other Shure Wireless Systems 23
Radio Frequency (RF) Settings 23
Setting the Transmitter RF Power 23
Networking 24
Connecting to a Network 24
Automatic IP Addressing 24
Configuration Tips 24
Network Troubleshooting 24
Connecting to an External Control System 24
Firmware Updates 24
Firmware Release Requirements 25
Mount the SLX-D Receiver in a Rack 25
Installing Footpads 26
Accessories 27
Optional Accessories 27
Specifications 31
Receiver Output Connectors 38
Transmitter Input 38
Frequency Range and Transmitter Output Power 38
Frequencies for European Countries 39
Certifications 41
Information to the user 41