User`s guide

ENGLISH
12
OPERATING THE PRESENTER SYSTEM
1. Attach the transmitter to your belt or waistband as shown in Figure 10. Depress
the tab marked PRESS and slip the belt or strap between the transmitter body and
the belt clip. The clip holds tighter if the material is drawn to the clip’s top wire.
FIGURE 10
2. Refer to Figure 11. Plug one end of the ac power adapter into the DC INPUT con-
nector on the receiver, and plug the other end into an ac power source (use PS20
for 105–125 Vac, 60 Hz power; use PS20E for 230 Vac, 50 Hz power). The green
POWER light on the receiver will glow.
3. Connect one end of an audio cable to the receiver OUTPUT (T3 ) or AUDIO OUT
or BALANCED LOW Z connector (T4) and the other end to the mixer input.
FIGURE 11
T1
45°
90°
T4G
T3
T11